- Joined
- Aug 14, 2000
- Posts
- 1,768
I've gone rgb crazy, and I wanted to build a scart cable for my tg16 to use w/ my YUV box. I'm using the mmmonkey amp tutorial (3 transistors) and the expansion port to tap the signals, and I wanted to know a couple things.
1. What's the 75ohm resistor about with scart? Do I need it/them? I already ordered a bunch, but I wanted to be sure.
2. If the 75ohm resistor is required, and I build my amp inside a female scart connecter (just like the plug housings everybody uses but female) will any male to male scart cable have the resistor (or is it more than 1?) or would I add it to the female socket where the amp will be?
Thanks!
1. What's the 75ohm resistor about with scart? Do I need it/them? I already ordered a bunch, but I wanted to be sure.
2. If the 75ohm resistor is required, and I build my amp inside a female scart connecter (just like the plug housings everybody uses but female) will any male to male scart cable have the resistor (or is it more than 1?) or would I add it to the female socket where the amp will be?
Thanks!
Last edited: