- Joined
- Apr 24, 2012
- Posts
- 1,268
I've been reviewing irratating maze for awhile now, and I'm interesting in getting it to work with an actual trackball. I have the MVS cart and I use it via the uni bios.
My question is can I wire a 4in trackball (non-kit) and buttons together in a custom made box or do I really need the associated kit with the trackball pcb. From what I've read, player 2 buttons are used for the track ball etc. while 1 player is left open for use. True?
Kits Contains:
Main PCB (MV-1B)
Edge Connector Interface PCB
Irritating Maze MVS cart
8 pin interconnect (connects main and interface pcb)
Standard Jamma Harness
Speaker connector harness
Control Panel connector harness
Trackball connectors Harness
Test/Service connector Harness
4 1/2 Trackball assembly and mounting hardware
5 pushbuttons (2 red, 3 blue)
Full Size marquee
CP Overlay
CP Sticker Set
Sideart (2)
Instructions user guide
My question is can I wire a 4in trackball (non-kit) and buttons together in a custom made box or do I really need the associated kit with the trackball pcb. From what I've read, player 2 buttons are used for the track ball etc. while 1 player is left open for use. True?
Kits Contains:
Main PCB (MV-1B)
Edge Connector Interface PCB
Irritating Maze MVS cart
8 pin interconnect (connects main and interface pcb)
Standard Jamma Harness
Speaker connector harness
Control Panel connector harness
Trackball connectors Harness
Test/Service connector Harness
4 1/2 Trackball assembly and mounting hardware
5 pushbuttons (2 red, 3 blue)
Full Size marquee
CP Overlay
CP Sticker Set
Sideart (2)
Instructions user guide