Simple replacement solution for CRE401.

NeoTurfMasta

NeoTurfMasta

DANCE DANCE KARNOV!,
20 Year Member
Joined
Jan 18, 2001
Posts
4,229
Anyone have any successful repairs with an alternative solution to the CRE401? Instead of recreating the damn thing.
 
Xian Xi

Xian Xi

JammaNationX,
15 Year Member
Joined
Dec 1, 2005
Posts
27,750
I have spares on my site. But yes I have built some from scratch.
 
shadowkn55

shadowkn55

Genbu's Turtle Keeper
15 Year Member
Joined
Dec 9, 2006
Posts
2,386
I've seen a board repair that solely used a 10k resistor array. It bridged several of the points but it seems to work and I don't have problems when playing games or doing the joystick test.
 
NeoTurfMasta

NeoTurfMasta

DANCE DANCE KARNOV!,
20 Year Member
Joined
Jan 18, 2001
Posts
4,229
I'm probably just going to recreate it for the Kizuna board...
 
NeoTurfMasta

NeoTurfMasta

DANCE DANCE KARNOV!,
20 Year Member
Joined
Jan 18, 2001
Posts
4,229
just going to put the CRE circuit on the actual board and not rely on pulling spares from boards.
 
NeoTurfMasta

NeoTurfMasta

DANCE DANCE KARNOV!,
20 Year Member
Joined
Jan 18, 2001
Posts
4,229
shadowkn55 said:
I've seen a board repair that solely used a 10k resistor array. It bridged several of the points but it seems to work and I don't have problems when playing games or doing the joystick test.
Click to expand...

Something like this may be my best bet. The board is getting too big to accomodiate the 120 resistors and caps and I really dont want to have to use pulled CRE401s

Edit: hmmm may have another idea.
 
Last edited:
You must log in or register to reply here.
Top