PDA

View Full Version : NGCD cable pin out on cable help



bwi
01-16-2001, 02:41 PM
the mini din connector on my NGCD scart cable was giving me a lot of grief so i cut hte end of and desoldered all the remaining wire. I made sure i wrote down which wire went to each pin. But ive lost it and i'm panicking , can someone please help or point me in a direction?

thanks

Bri

CADMAN2K
01-16-2001, 06:19 PM
Yep,
have a look at these 2 Links to help you.!
If you've messed up big style you'll probably need a multi-tester to see which coloured wires are at the Scart end of the cable then you can match them to the Din plug end with the assistance of the 2 Links. I know its sometimes a Hard Job to re-solder onto the Din so it may pay you to buy a new one. Additionally if you get stuck i believe the Megadrive / Genesis scart cable would work if you can get your hands on one but someone else needs to confirm it.
Here's the links. Good Luck
http://www.gamesx.com/hwb/co_Scart.html http://www.gamesx.com/avpinouts/neoav.htm

bwi
01-17-2001, 02:22 PM
thanks for the reply. I tried to get a new din connector but maplin have now discontinued the mini din http://www.neo-geo.com/ubb/redface.gif/

CADMAN2K
01-18-2001, 02:02 AM
No. Problem,
p.s Has your Neo got a SVHS socket.!?
If you get stuck I beleive you can go from SVHS to SCART.!?
I think I can tell you what you need here.!
rop me an email if you get stuck