NGCD cable pin out on cable help

bwi

,
20 Year Member
Joined
Dec 15, 2000
Posts
460
the mini din connector on my NGCD scart cable was giving me a lot of grief so i cut hte end of and desoldered all the remaining wire. I made sure i wrote down which wire went to each pin. But ive lost it and i'm panicking , can someone please help or point me in a direction?

thanks

Bri
 

CADMAN2K

Kabuki Klasher
Joined
Nov 25, 2000
Posts
125
Yep,
have a look at these 2 Links to help you.!
If you've messed up big style you'll probably need a multi-tester to see which coloured wires are at the Scart end of the cable then you can match them to the Din plug end with the assistance of the 2 Links. I know its sometimes a Hard Job to re-solder onto the Din so it may pay you to buy a new one. Additionally if you get stuck i believe the Megadrive / Genesis scart cable would work if you can get your hands on one but someone else needs to confirm it.
Here's the links. Good Luck
http://www.gamesx.com/hwb/co_Scart.html http://www.gamesx.com/avpinouts/neoav.htm
 

bwi

,
20 Year Member
Joined
Dec 15, 2000
Posts
460
thanks for the reply. I tried to get a new din connector but maplin have now discontinued the mini din
redface.gif
/
 

CADMAN2K

Kabuki Klasher
Joined
Nov 25, 2000
Posts
125
No. Problem,
p.s Has your Neo got a SVHS socket.!?
If you get stuck I beleive you can go from SVHS to SCART.!?
I think I can tell you what you need here.!
rop me an email if you get stuck
 
Top