MVS: My hard dip won't adjust

D

daback-daboot

Guest
Hey, I did a serch on this and found nothing. I can adjust all of my soft dip settings, but when I go to hard dip none of my buttons will adjust anything, except button 3, or c, which brings me back out of the settings screen. I really want to set it to free play. So, can someone tech the crap out of my problem? Any help is good help. Thanks! help
 

Fredscape

Loyal Neo-Disciple
Joined
Sep 18, 2002
Posts
833
don`t you need to set the dips on the board itself? there are some on the board, if I`m not mistaking it`s dip 2 that gets you free play

<small>[ August 11, 2003, 05:06 AM: Message edited by: Fredscape ]</small>
 
D

daback-daboot

Guest
Fredscape:
don`t you need to set the dips on the board itself? there are some on the board, if I`m not mistaken it`s dip 2 that gets you free play
When I go in to the hard dip settings it shows free play as an option, I just cant change ANY of the hard dip settings.

<small>[ August 11, 2003, 05:09 AM: Message edited by: jov luke ]</small>
 

Fredscape

Loyal Neo-Disciple
Joined
Sep 18, 2002
Posts
833
that`s because those settings are showing the way your boards actual dip switches are set up...check the side of your mvs board for these switches and set dip 2 to on.
You cannot change anything in your bios in the hard dip settings with your buttons .

that should do the trick.....
 
D

daback-daboot

Guest
Fredscape:
check the side of your mvs board for these switches and set dip 2 to on.
I feel like I'm getting closer, where on the board is the switch? I have the 4-slot board. I just felt around on it and didn't feel any switches. help
 

John_Smith

B. Jenet's Firstmate
Joined
Jun 9, 2003
Posts
400
On my MV-4F its on the left side to the rear. A small blue and silver box with 8 tiny switches, its actually dip 7 which is freeplay too. I guess it depends which way you look at it but it should be numbered.

Cheers!
Toby glee
 
D

daback-daboot

Guest
...and the award for person who rocks the most goes to...and its a tie! Fredscape and John_Smith!! Thanks alot guys, now if I can just get to those little fraggles...
 
Top