HELP for an bad working AES PLEASE

Hi,

I have a neogeo AES US system who has a problem. After playing for a brief time ( 30s ) after power on the system reset at its own ! I thought it might be the slot or the cardridge that could be dirt so I cleaned it but nothing good happened. I took up the Pcb of the system off its black robe to see it closer and when turning it back I saw 2 electronic resistances soldered by themselves with 2 points at the back of an eprom marked SNK CORP PRO-B0 89081402 9016KK201??
May be my problem comes from this 2 resistances ?
Can someone help me please ? Can someone send me some photos of his PCB system to see it ?

With many thanks,

Kyosnk

Tell me exactly what you need..

I'll try and send you some board picks tomorrow.

I need a Email address to send the pics too..

<img src="http://www.imagemagician.org/images/cokegirl/98325.jpg" alt=" - " />

<small>[ August 07, 2003, 01:51 PM: Message edited by: chris1 ]</small>

Picks sent.
<img src="http://www.imagemagician.org/images/cokegirl/98325.jpg" alt=" - " />

<small>[ August 07, 2003, 01:51 PM: Message edited by: chris1 ]</small>