RomanH
n00b
- Joined
- Jul 18, 2010
- Posts
- 16
Hi everybody
This is my second try to start a thread in the Welcom-sub forum. The first one seems to have never made it past the admin.
I'm 34, Swiss, long time Neo-Geo fan and have finaly decided to build a custom cab thing with MVS hardware inside. Here's what's working so far:
first tests with all the electronics components...
for the control panel I'm using the pdf I found on http://www.neogeomvs.com/
yesterday the MDF (5mm) and clear plastics (3mm) came from the lasercutter (www.ponoko.com). I "sandwiched" the printed control panel artwork between them and the result looks fricking awesome!
(please note there is still a protective film on the plastic.)
some more pics:
http://www.neo-geo.com/forums/album.php?albumid=261
I will continue to upload pics as the project progresses. :-)
RomanH
This is my second try to start a thread in the Welcom-sub forum. The first one seems to have never made it past the admin.
I'm 34, Swiss, long time Neo-Geo fan and have finaly decided to build a custom cab thing with MVS hardware inside. Here's what's working so far:
first tests with all the electronics components...
for the control panel I'm using the pdf I found on http://www.neogeomvs.com/
yesterday the MDF (5mm) and clear plastics (3mm) came from the lasercutter (www.ponoko.com). I "sandwiched" the printed control panel artwork between them and the result looks fricking awesome!
(please note there is still a protective film on the plastic.)
some more pics:
http://www.neo-geo.com/forums/album.php?albumid=261
I will continue to upload pics as the project progresses. :-)
RomanH