MVS board change

I'm about to get a 1 slot MVS cab....and I'm seeing on <a href="http://www.hardmvs.com" target="_blank">www.hardmvs.com</a> that the 1-slot boards are closer to a jamma standard than the 2,4,6 slot boards that he calls MVS standard....how hard and what exactly is involved in changing the two out? Will the multi-slots work w/o any moding?

Howdy and welcome to the forums.

A 2/4/6 Slot will work in a jamma cab, but you wont have select/D button unless the cab is wired for it. Will also only have Mono sound.
you can add the missing components pretty easially, if your good with wiring.

I hope this helps

Check here <a href="http://www.system16.com/jamma.html" target="_blank">http://www.system16.com/jamma.html</a>

1 slot systems are standard JAMMA, with one additional button (D) at location C/25. Multislot systems are the NeoGeo pinout.

<small>[ May 11, 2003, 12:35 AM: Message edited by: Reznor007 ]</small>

Cool deal.....thanks for the help guys.