MV-IC Memory Card reader

Where do I get a MV-IC Memory Card reader for my 4-Slot?

Is this plug and play, or do I have to solder something?

No soldering required, it consists of a small pcb with the mem card slot and 2 h/phone sockets. It is connected to the motherboard using 4 cables, if you do pick one up be sure you get all 4 with it. I got mine from Briggs quite a while ago, its in bad shape though. One of the headphone sockets doesnt work and the other has a loose connection. I paid well over the odds for it too, desperation is a terrible thing. They do pop up on eBay occasionally, keep an eye out. You could try Briggs and a post in the wanted section couldn't hurt either.

After re-reading this post I realised it looks like I'm saying Briggs ripped me off. This is absolutely not the case, I knew exactly what I was getting and have no problem with Briggs at all.

[ August 02, 2002: Message edited by: NeoGoaT ]</p>

No soldering required.
Where to get one,ask on the wanted forum, make sure to get the connecting leads, they are special and would be a real pain to have to make up...

thanks for the replies guys!

if you are not interested in the one i have you can also get them for 40+shipping at <a href="http://www.thegameroom.com" target="_blank">www.thegameroom.com</a> but you will have to email or call them about it because it is not on their site.