How the hell do you do it?

I recently got a bunch of non-JAMMA pcb's from a dealer for $50, and I was wondering how the hell you would go about Jammatizing them (you know, soldering a fingerboard adaptor to the pinouts) and I want to know if there are any of you out there who have done this before.

If not, are there any good FAQs on how to Jammatize boards (besides the very vague ones on Gamefaqqers.com).

Some sort of help would be apprectated.

The first thing I would do is put the boards in some sort of order. All Konomi's, Romstar's etc. Then you need the Pinouts for each board. Just match the Jamma Pinouts with the PCB pinouts. Send me an EMail and I will send you a link of a TON of board pinouts.

Check your inbox.

Thanks for the help.

Err...

did you get my email?

well anyway, can I have that list please?

throw a list of games onto here, lets see what we can do. I wont repeat it again, but you know where my recommendation is for buying JAMMA adapters for older games. Am still developing newer JAMMA adapters each day. Latest ones are Carnival by Sega and Astro Invader by Stern/URL.