PDA

View Full Version : NEO GEO PADS ON PC !



zerofil
09-18-2000, 09:37 PM
Hi,

I made an interface for using
Neo Geo Pad old controllers
working under DOS + Win 9X.

Check it at :
www.snocud.pf/zerofil/neogeo.htm (http://www.snocud.pf/zerofil/neogeo.htm)

also take a look at http://kof2k.iscool.net

Thank U.

SmokeYa
09-18-2000, 10:20 PM
Actually, I think the best way to use console/arcade controllers on a PC is to use a Microsoft sidewinder gamepad as the sac controller (instead of a SNES controller as you suggested). Here are a few reasons:

1. A sidewinder gamepad is very cheap nowadays. You can get a used one for like <$10 on ebay. It's no big deal to sacrifice one. It doesn't matter if the gamepad is used because you only need the circuit board.
2. You will be able to connect your controller though a normal joystick port
3. A sidewinder gamepad is basically compatable with almost every PC game, therefore whatever type of console/arcade controller you interface though the sidewinder pad will be compatable with almost all games.
4. Requires less work to build.

zerofil
09-18-2000, 11:40 PM
I know all of this, but at the time
I made this interface I already had
my Snes pad hooked, and I was looking
for ages to hook my neo geo pad controller
on a comp. I didn't had Ms Sidewinder too.

I've done it with what I got. Now anyone
is able to imagine that it would perfectly
work with any supported pc pad.

However it's a good remark you've done

Thank you

SmokeYa
09-19-2000, 11:43 AM
Sorry, I didn't mean to offend you. I'm glad you brought up the topic. I don't think that most people knew you can create your own PC controller. I just want people to know that there are other options then using a SNES pad.

zerofil
09-19-2000, 04:59 PM
You too Excuse me !

And thank you for developping the
subject. It was appreciated.