MV1-FZ does it work with Jamma boards

Hi,

Just purchased a consolized from Tomcat (great seller), but wondered if I can use this for Jamma boards too. Is it simply a case of plugging the board into the Jamma connector or am I missing the point (AGAIN!)

I REALLY want Commando and the Mr Do boards. Could I use the consolized to play these, or do I need a SuperGun?

Thanks in advance

Cheers, Lee

You need a supergun or a cabinet to play other boards. Do not try connecting two edge connectors, that is a very bad idea.

I personally recommend getting a cabinet, they're the bees knees.

It really depends on the way the unit was consolized. I know some people use a jamma connector and solder to it which is basically a supergun. If this is the case you can unplug the harness from the MV1FZ and plug it into a jamma board.