Jammacast kick-harness whoas?

Hi guys!

I need a little help with my Jammacast. For some reason button 2 for player 1 and buttons 2 and 4 on player 2 aren't responding. Does anyone know what would cause this to happen? I know it's not the kick harness as I switched between the Jammacast and a CPS2 board to confirm that it was indeed the Jammacast. I reseated the kick and Jamma harness a number of times with no luck. Any help would be much appreciated.

Thanks!
- Matt

Bad solder points

Where exactly? And what's the next step of action? Do I just take a soldering gun and reheat the preexisting points?

norton9478 said:

Bad solder points

Click to expand...

BeaglePuss said:

Where exactly? And what's the next step of action? Do I just take a soldering gun and reheat the preexisting points?

Click to expand...

Probably the wire came loose...

You will have to open it up and start looking for loose wires.

Stuff like this is why I never sold any of mine.

Very cool. Thanks for the tip! I will pop it open and see if anything managed to wiggle loose.

norton9478 said:

Probably the wire came loose...

You will have to open it up and start looking for loose wires.

Stuff like this is why I never sold any of mine.

Click to expand...

Also check for bridged connections between ground and whatever. If it's not responding it could be shorted to ground for those commands.