Any Vega 9000DX Supergun Owners Out There?

If so... I need your help...

If you can help with any of these questions I'll be massively grateful as I have just purchased one and have no manuals and several bits missing/preventing from getting the darn thing to work -

1. What fuse does it take?
2. What's the RGB/S-Video Pin Out?

If anyone can help please post...

Cheers people!

Just open it up.

Already have...

Difficult to figure out the RGB/S-Video pinouts as they are soldered directly to a video encoder board. Fuse ratings seem to be written in Japanese.

Where is the fuse located? Is it inline from the wall to the PSU or from the PSU to the harness? If it's just on the +5v line then it's not more than +5v@15A usually.

As for the RGB pinout just trace the wires from the jamma harness to the encoder.