Adjusting Coin slot?

Fox1 · Jul 23, 2002

I was wondering how do I adjust the coin slot on a neo candy for US quarters? I know mine can, but how do I do it?

m_bish0p · Jul 24, 2002

I was under the impression that you replaced the mechs, just like you do for any other machine. They sell new mechs on Happs for around 10$ each.

Maybe the candy's are adjustable. I don't know about those specific mechs, but usually you would just buy the right mech for the tender you intend to use.

hope this helps!

Fox1 · Jul 24, 2002

Thanks, but I got the answer, i have to adjust a screw or something in it, heh

m_bish0p · Jul 25, 2002

like I said, could be a candy thing. I know there's a such thing as adjustable mechs, but all my machines have replacable ones.

Didn't mean to give any misinfo.

EKW · Jul 26, 2002

IF you want, You soulld be able to use a US coin mech, If you want one, I live in The bay Area, And will give you one, I have a alot of $0.25 mechs, So if you want one, I will sned you one for the price of shipping.

P.S. - I have a Super Neo 29 also, And that was the best and easyest way to do it.

Hope that helps,
Erick

Fox1 · Jul 26, 2002

Hello,

Thanks for the kind offer, but I think im just going to adjust it, or try to figure out how to adjust it heh.

Thanks

Alex

prosper1ne · Jul 27, 2002

hey fox, if you figure out how to adjust it could you pm me or post on this thread, id like to adjust my coin slot as well. ps. you live in bay area? im 20, whats your age? id like to scope out that hyper and im in the east bay.

[ July 27, 2002: Message edited by: prosper1ne ]</p>

Fox1 · Jul 29, 2002

Hey,

Im 18, and the hyper neo 64 is gone right now because I wasn't really playing it that much....

[ July 29, 2002: Message edited by: Fox1 ]</p>

prosper1ne · Jul 29, 2002

well thats all good homie. would i want to waste my money on a hyper? did you figure out how to adjust your coin slot?

Fox1 · Jul 29, 2002

all you need is a philph screw driver to adjust top and middle part, there is 2 screw on coin slot loose it and adjust to right position that fit a quarter, thats what jack told me at arcade infinity, the hyper is a good system, its just that I wanted to get the other games for it, but it would cost me too much money. Also I don't like changing the games between mvs and hyper, that damn audio cord is hard to get out of the hyper heh

[ July 29, 2002: Message edited by: Fox1 ]</p>

Gamefan · Jul 30, 2002

Fox1,

Can you email me exactly how to do it? I have two MVS 25" and I need to swap them out to take quarters also.

Thanks,

GAMEFAN

Fox1 · Jul 30, 2002

GameFan,

Sure, I need to figure out how to do it myself, hehe, those were the direct instructions from Jack and I need to get my Keys from him first as well, as he sent me the wrong keys for my arcade machine, so I cant open my coin slot. I will when I get my keys, which should be tomorrow or the day after.

Thanks

Alex

Gamefan · Jul 30, 2002

Thanks Fox1, I really appreciate it!!

GAMEFAN

Adjusting Coin slot?

Fox1

Bub & Bob's Bubble Buddy,

m_bish0p

Over Top Auto Mechanic

Fox1

Bub & Bob's Bubble Buddy,

m_bish0p

Over Top Auto Mechanic

EKW

n00b

Fox1

Bub & Bob's Bubble Buddy,

prosper1ne

King's Dry,

Fox1

Bub & Bob's Bubble Buddy,

prosper1ne

King's Dry,

Fox1

Bub & Bob's Bubble Buddy,

Gamefan

OldSkool4Life,

Fox1

Bub & Bob's Bubble Buddy,

Gamefan

OldSkool4Life,