Non-booting AES... Broken?
- Thread starter Traxnada
- Start date
- Joined
- Nov 29, 2005
- Posts
- 4,316
It should at least give a flicker of some kind on the TV screen. If not, you might have a broken power jack or bad regulator circuit in it.
RJ
RJ
Traxnada
n00b
- Joined
- Mar 11, 2009
- Posts
- 32
Nothing, it's not even flickering...
I used it 2 weeks ago, then I put it back in it's box... I took it to play 20 minutes ago and then I saw it wasnt working anymore
Do you know how I could repair it and where are those parts?
The voltage regulator is the 3 pin blue connector near the on/off switch right? The power jack SEEMS fine...
I used it 2 weeks ago, then I put it back in it's box... I took it to play 20 minutes ago and then I saw it wasnt working anymore
Do you know how I could repair it and where are those parts?
The voltage regulator is the 3 pin blue connector near the on/off switch right? The power jack SEEMS fine...
- Joined
- Nov 29, 2005
- Posts
- 4,316
Post pics of the board so I can see which one you have.
Also, do you have a voltmeter? It would be very helpful to know if you do have voltage at the chips but no video out. If that's the case then check the clock crystal circuit... or if your board has the little daughtercard on it you might have a broken wire connecting it to the main board.
RJ
Also, do you have a voltmeter? It would be very helpful to know if you do have voltage at the chips but no video out. If that's the case then check the clock crystal circuit... or if your board has the little daughtercard on it you might have a broken wire connecting it to the main board.
RJ
