Tech people: what JST pins do I need?

kernow

kernow

Superior Being
25 Year Member
Joined
Sep 1, 2001
Posts
38,859
ok .. I've now got my loom to wire up an AWSD to an egret power supply. The last thing I need to make it as neat as possible are the pins which fit to the white plastic connectors in the E2 PSU.

The e2 psu has pins on the PSU side and white plastic connectors which plug into them, I have the connectors so I was just planning on replacing the pins, after I'd crimped them onto the wires on my new loom.

Does anyone know the part number I need? I have a lot of JST NH compatible pins but these are different ones. I can try get a picture or two if need be.

Cheers

And lets be honest you must have some kind of super human powers if you can decipher this and actually know which pin part number I need. :scratch::emb:
 
SetaSouji??

SetaSouji??

There Can be Only One
Joined
Mar 31, 2009
Posts
4,158
Egret/E2s are wired JVS. Just buy a pre-tied harness for 50.

p.s. pics so I can actually tell what the fuck piece you want.
 
SetaSouji??

SetaSouji??

There Can be Only One
Joined
Mar 31, 2009
Posts
4,158
It's been a long day. :oh_no:


Take a look at the JST YL and see if that's what you need.
 
kernow

kernow

Superior Being
25 Year Member
Joined
Sep 1, 2001
Posts
38,859
DSCN2996.jpg


DSCN2997.jpg


DSCN3001.jpg


DSCN3002.jpg


DSCN3004.jpg


DSCN3005.jpg


DSCN3006.jpg


:help:
 
SetaSouji??

SetaSouji??

There Can be Only One
Joined
Mar 31, 2009
Posts
4,158
Ok.

You need a 3 pin molex and a universal mate n lock. Re-clamp the wires and you'll be all set.



edit: you could even use a 2mm centerline, but you'll have to find one that uses the right amount of pins.
 
Last edited:
kernow

kernow

Superior Being
25 Year Member
Joined
Sep 1, 2001
Posts
38,859
?

I just need those pins, I have the rest of the stuff for the AWSD cab side. If I know those pins part number I can put those on the harness I have and put them into the existing connectors on in the pictures. :spock:
 
kernow

kernow

Superior Being
25 Year Member
Joined
Sep 1, 2001
Posts
38,859
?

I just need those pins, I have the rest of the stuff for the AWSD cab side. If I know those pins part number I can put those on the harness I have and put them into the existing connectors on in the pictures. :spock:


Unless you mean getting a whole new connector which is an option too I guess. hmm.
 
SetaSouji??

SetaSouji??

There Can be Only One
Joined
Mar 31, 2009
Posts
4,158
kernow said:
?

I just need those pins, I have the rest of the stuff for the AWSD cab side. If I know those pins part number I can put those on the harness I have and put them into the existing connectors on in the pictures. :spock:


Unless you mean getting a whole new connector which is an option too I guess. hmm.
Click to expand...

the whole damn connector would be the easiest route, but not the chapest.

If you want the pins themselves, you want male molex pins. Crimping is not fun.
 
kernow

kernow

Superior Being
25 Year Member
Joined
Sep 1, 2001
Posts
38,859
Yeah I have multiple wires to go into each pin too so it'd suck.

I'm honestly thinking about just using the existing wires and soldering them direct to my harness, maybe thats the best idea. hmm.
 
kernow

kernow

Superior Being
25 Year Member
Joined
Sep 1, 2001
Posts
38,859
Cool, thanks for the info. Still not sure which is the best way to go, I still think soldering probably . bleh
 
You must log in or register to reply here.
Top