WilalvesBR
NEST Puppet
- Joined
- May 12, 2007
- Posts
- 176
Hello,
I got this Nightmare in The Dark in a trade.
* It has 2 MX chips and one MX eprom on the program board;
* Also has 4 eproms on the CHA Board;
* Solder points on chip positions C3, C4 and C6 has many holes indicating that those chips were removed;
* Bad solder and a strange bridge on the back of the program board.
Pictures:
I got this Nightmare in The Dark in a trade.
* It has 2 MX chips and one MX eprom on the program board;
* Also has 4 eproms on the CHA Board;
* Solder points on chip positions C3, C4 and C6 has many holes indicating that those chips were removed;
* Bad solder and a strange bridge on the back of the program board.
Pictures: