Power Supply Recommendation? Urgent!

Ok, It looks like my PSU is shot in my Neo Geo MVS 1-Slot Cabinet. The monitor that I have in there is a newer model that does not require an isolation transformer, I intend to take that out. My monitor has its own AC power cord. My 1 slot is an MV-1C.

What would be be best PSU to get for my setup now? I'd like to go ahead and order one this weekend.

Here's the mess I have now:

<img src="http://www.tiptonium.com/stuff/psu.jpg" alt=" - " />

Why oh why did that thing give up on me?!?!

<a href="http://www.neo-geo.com/ubb/ultimatebb.php?ubb=get_topic;f=5;t=003960" target="_blank">http://www.neo-geo.com/ubb/ultimatebb.php?ubb=get_topic;f=5;t=003960</a>

Only 4 posts down and you didn't look at it shame

-Nick

nruva:
<a href="http://www.neo-geo.com/ubb/ultimatebb.php?ubb=get_topic;f=5;t=003960" target="_blank">http://www.neo-geo.com/ubb/ultimatebb.php?ubb=get_topic;f=5;t=003960</a>

Only 4 posts down and you didn't look at it shame

-Nick

Click to expand...

I saw that but my setup does not have the molex connector. So, that's the one to get? Do I still wire the fuse, AC line filter, power distribution or is that not need with the Ultimate PSU?

Tiptonium:

nruva:
<a href="http://www.neo-geo.com/ubb/ultimatebb.php?ubb=get_topic;f=5;t=003960" target="_blank">http://www.neo-geo.com/ubb/ultimatebb.php?ubb=get_topic;f=5;t=003960</a>

Only 4 posts down and you didn't look at it shame

-Nick

Click to expand...

I saw that but my setup does not have the molex connector. So, that's the one to get? Do I still wire the fuse, AC line filter, power distribution or is that not need with the Ultimate PSU?

Click to expand...

I am just getting the 130 watt one, the second one in the post... that should be just like yours The ultimate one is cool, but it is going to take some reengineering to get it into my setup, I would rather just... well, plug and play

-Nick

Tip - pretty much any arcade switching power supply will replace that one just fine. The other ones were used in the big red cabs and they have the wiring setup already. Just go with one like you have - This one from Happ would be great like nruva said:

<a href="http://www.happcontrols.com/index.html?http://www.happcontrols.com/powersupplies/80021000.htm!" target="_blank">http://www.happcontrols.com/index.html?http://www.happcontrols.com/powersupplies/80021000.htm!</a>

Briggs:
Tip - pretty much any arcade switching power supply will replace that one just fine. The other ones were used in the big red cabs and they have the wiring setup already. Just go with one like you have - This one from Happ would be great like nruva said:

<a href="http://www.happcontrols.com/index.html?http://www.happcontrols.com/powersupplies/80021000.htm!" target="_blank">http://www.happcontrols.com/index.html?http://www.happcontrols.com/powersupplies/80021000.htm!</a>

Click to expand...

Yep that was the one I was refering to in my post

-Nick

PSU ordered this morning. Thanks everyone.

I just ordered one too... and bought myself a nice new 16 gauge power cord to finally replace my old Japanese 2 prong... My candy is going to be rocking by next weekend!

-Nick