MVS Cartridge Repair?
- Thread starter Briggs
- Start date
I'd start out by thoroughly cleaning the contacts. if that doesn't help, open them up and check if any pins have bad solder spots (cracked or loose), or any traces are broken. in the latter cases, it's easy to re-solder the pins or bridge the traces with a wire.
on my 6 slot mvs
the cartridges are sometimes tricky. I will get lines in my games if i insert them too far into the slot. What i do is i insert the game and then i grasp the bottom of each side of the cartridge, and back it out slightly. This cures it. this system doesnt seem to like cartridges that are bottomed out.
the cartridges are sometimes tricky. I will get lines in my games if i insert them too far into the slot. What i do is i insert the game and then i grasp the bottom of each side of the cartridge, and back it out slightly. This cures it. this system doesnt seem to like cartridges that are bottomed out.
