PDA

View Full Version : Garou MOTW Boot?


malkie13
04-18-2009, 12:18 PM
I've asked the seller for actual pics of the inside of the cart, but I haven't yet gotten a response, however, they have this picture listed:

http://i1.ebayimg.com/03/i/001/42/7a/0b35_1.JPG

And that sure does look like a big ol eeprom hanging out in there.

Thoughts?
SetaSouji??
04-18-2009, 12:23 PM
If you can get a photo of the other board it would be alot easier to tell, afterall some carts do use eeproms?
bustedstr8
04-18-2009, 12:48 PM
Thats not even a SNK pcb :angry:
ki_atsushi
04-18-2009, 12:51 PM
Yep, boot.
SetaSouji??
04-18-2009, 12:53 PM
Thats not even a SNK pcb :angry:

that however, would do it.
malkie13
04-18-2009, 01:28 PM
I figured as much. Seller got all defensive too when I asked about it, hehe.
Thanks folks!
chewurface
04-18-2009, 01:37 PM
100% bootastic!

Everything about that picture screams BOOT! From the case to the non-SNK PCB to the EEPROM. :loco:
Drakon
05-30-2009, 11:21 PM
I've asked the seller for actual pics of the inside of the cart, but I haven't yet gotten a response, however, they have this picture listed:

http://i1.ebayimg.com/03/i/001/42/7a/0b35_1.JPG

And that sure does look like a big ol eeprom hanging out in there.

Thoughts?

amazing how you can tell it's an EPROM looking at the solder side

wait....maybe it's just a really blurry picture?
madman
05-30-2009, 11:31 PM
LOL at Drakon. That's the solder side?
mmsadda
06-02-2009, 08:14 PM
amazing how you can tell it's an EPROM looking at the solder side

wait....maybe it's just a really blurry picture?

lol WUT?!?

That's clearly not the solder side; in the bottom two slots on the right are clearly windowed chips.

On top of that, the fact that the PCB is not legit tells us all we need to know. ;)