WTF Seriously

Joined
May 23, 2008
Posts
30
:loco: Well i was playing Metal Slug X the other day and my controller became loose and then this ...

P1040107.jpg


FUCK ME NOT! my board and my cart are legit :blow_top:

P1040108.jpg


Yeah shit is pretty messy, just finished it... MV1F with Unibios 3.0

Also that didn't happen before i got the Unibios... :drool:
 

kernow

Superior Being
25 Year Member
Joined
Sep 1, 2001
Posts
38,831
I've seen this before, try changing the region or something, or clearing backup data.
 

buaku

Hardened Shock Trooper
Joined
Dec 3, 2007
Posts
438
Wow, fucking win.

Hahaha. I aim to please :P

Well I really wanted to make sure everything worked when I first got it all.
My spare PSU died, so I just flipped one of my computers on its side unhooked the ATX connector and jammed wires in there. I didn't have any spare wood around, so I thought, hey! cardboard will work for testing :P
It worked quite nicely. I later did build a supergun and unsoldered the wires from the JAMMA edge.
In that pic I did also make the mistake of using solid wire. Stuff pops off too easily if you brush agasint it the wrong way.
 

Xian Xi

JammaNationX,
15 Year Member
Joined
Dec 1, 2005
Posts
27,762
Haha, funny you mention that. My first CMVS I tried to use solid core wiring, too. I learned quickly that everyone was using stranded.
 

buaku

Hardened Shock Trooper
Joined
Dec 3, 2007
Posts
438
I thought it would be stronger since it was solid! Perhaps it was a bit too strong!
That first setup was pretty ghetto, but I'm proud of it, lol. Explaining that to people just makes me laugh, hehe.
 

malkie13

Zero's Secretary
Joined
Mar 5, 2009
Posts
147
Hahaha. I aim to please :P

Well I really wanted to make sure everything worked when I first got it all.
My spare PSU died, so I just flipped one of my computers on its side unhooked the ATX connector and jammed wires in there. I didn't have any spare wood around, so I thought, hey! cardboard will work for testing :P
It worked quite nicely. I later did build a supergun and unsoldered the wires from the JAMMA edge.
In that pic I did also make the mistake of using solid wire. Stuff pops off too easily if you brush agasint it the wrong way.

I'm rebuilding / redesigning the CP in my two slot cab. Rather than waste wood (and go nuts hole sawing over and over), I've simply been using 3-4 layers of cardboard with the buttons jammed in to check spacing, feel, look, etc.

Cardboard is the prototyper's best friend.
 
Joined
May 23, 2008
Posts
30
Thats one ugly irreversible consolisation.

Thanks for your concern man! But actually no, it can be reversed and i don't have plans to use it in a cab or something...

I think the scotch tape is the homerun.

Well Xian Xi tell me of a good place to hide/set the neobitz ;)

Love the crocodile clips

Yeah im poor and i can't afford a 5v Power supply now so im using the old AT i ripped from my dead PC but hey shit works!

And well yeah the problem was solved clearing the backup so thanks to everyone again :glee:

Suggestions for my CMVS?
 
Last edited:

buaku

Hardened Shock Trooper
Joined
Dec 3, 2007
Posts
438
You could always consider building a supergun instead of consolizing the thing.
That's what I ended up doing. Plus its nice in case you ever get the urge to get more PCB's!

@malkie13
That's just awesome! Sturdy cardboard is just so damn handy!
 
Top