Small arcade power supplies
- Thread starter Hewitson
- Start date
xiao_haozi
Avid Neo-Expert
- Joined
- Jan 22, 2009
- Posts
- 1,977
xiao_haozi
Avid Neo-Expert
- Joined
- Jan 22, 2009
- Posts
- 1,977
Ah, yeah... trickier now with -5V 
I'll check again later... I think they had a few with -5 but not sure if they were the small guys or not. I was planning on skipping -5 but I guess I shouldn't take that kind of shortcut.
I'll check again later... I think they had a few with -5 but not sure if they were the small guys or not. I was planning on skipping -5 but I guess I shouldn't take that kind of shortcut.
How much amperage do you need on the +5?
I see one here but its only 3A on the +5.
http://mouser.com/Search/ProductDetail.aspx?qs=sGAEpiMZZMu0oxGuRuNKH1oQX%2bokQ15Rro/z59dSg3M=
I see one here but its only 3A on the +5.
http://mouser.com/Search/ProductDetail.aspx?qs=sGAEpiMZZMu0oxGuRuNKH1oQX%2bokQ15Rro/z59dSg3M=
- Joined
- Dec 1, 2005
- Posts
- 27,762
The one in my supergun is:
pte43-31 is the one I have.
http://www.powdec.com/pdf/pte43.pdf
The output is:
+5v@6A
+12v@3.6A
-12v@.5A
I had to convert the -12v to -5v.
I never had a problem with it so far.
pte43-31 is the one I have.
http://www.powdec.com/pdf/pte43.pdf
The output is:
+5v@6A
+12v@3.6A
-12v@.5A
I had to convert the -12v to -5v.
I never had a problem with it so far.
- Joined
- Dec 1, 2005
- Posts
- 27,762
Supposedly these guys carry Powdec PSUs:
http://gccomponents.co.uk/home.htm
If they carry the UPN65-32 then that would be better.
Rated at 65w max continuous
+5v@9A
+12v@5A
-12v@1A
It's 5" x 3" x 1.34"
http://gccomponents.co.uk/home.htm
If they carry the UPN65-32 then that would be better.
Rated at 65w max continuous
+5v@9A
+12v@5A
-12v@1A
It's 5" x 3" x 1.34"
Hewitson
Metal Slug Mechanic
- Joined
- Mar 6, 2008
- Posts
- 2,198
Thanks for the links Xian Xi.
A unit like you have in your supergun is exactly what I'm looking for, although I'm after one with considerably more wattage. I'd like to be able to power any board I might come across, including 6 slotters.
A unit like you have in your supergun is exactly what I'm looking for, although I'm after one with considerably more wattage. I'd like to be able to power any board I might come across, including 6 slotters.
I'd love to find a small one that could dish out the power for my 6-slotter.
All I can find so far is
http://happ.com/powersupplies/80021000.htm
It might be a good idea to try and find one that puts out higher voltages at more amps, and then hook in a voltage regulator to get it down to what you need. Basically what Xian Xi did.
All I can find so far is
http://happ.com/powersupplies/80021000.htm
It might be a good idea to try and find one that puts out higher voltages at more amps, and then hook in a voltage regulator to get it down to what you need. Basically what Xian Xi did.