FS: Jamma Test Rig w/JROK Encoder & Sync Cleaner

Selling my JROK test rig that I used for recording my jamma videos. I used this primarily because I needed S-video to record and the Neobitz that I had in my supergun was not compatible with a lot of my boards via S-video. This does not output sound and is not a supergun.

This unit does have bare wire bridges which I used for testing a lot of things. You can easily test if a line is reading high or low and also add additional ground points on the PCB you are testing.

The RGBS is pulled from the source but does not have pass through meaning that if you plan to use this in a cab for recording videos you need to solder the bridges for the RGBS so you can display the image on the cab as well as the TV at the same time. **I can however modify it to have passthrough so you can record while you play on the cab.**

JROK 3.1 (Svideo & Composite)
JROK Sync Cleaner w/switch
RGB Pots (500 ohm)
Molex Connector (If you ever want to use the same jamma finger with another encoder)

I no longer need this since I have a 4.1 in my supergun. Good for some one who wants to change their RGB encoder and doesn't want to mess with soldering. Just plug and play.

Selling for $60 shipped

All my videos prior to Uo Poko were made using this.

Here's some pics:

Wow great price XX!

how much shipped to france ?

Pending.

Bump

Pms replied to.

No one? I'll just keep it as I won't go any lower than that. The parts alone were $80+.

how does this work.?
i mean.. is capable to show same images on two different screen( for example monitor cab and tv) at same time?

Yes it does. This one is no longer available but they're easy to make.

thanks for the reply.

my fault .. i didnt read this:
"The RGBS is pulled from the source but does not have pass through meaning that if you plan to use this in a cab for recording videos you need to solder the bridges for the RGBS so you can display the image on the cab as well as the TV at the same time. **I can however modify it to have passthrough so you can record while you play on the cab.**"

but you can specify this notice.?
what''s is a passthough and what happen if rgbs isn't bridged?

@Alaska- said:

thanks for the reply.

my fault .. i didnt read this:
"The RGBS is pulled from the source but does not have pass through meaning that if you plan to use this in a cab for recording videos you need to solder the bridges for the RGBS so you can display the image on the cab as well as the TV at the same time. **I can however modify it to have passthrough so you can record while you play on the cab.**"

but you can specify this notice.?
what''s is a passthough and what happen if rgbs isn't bridged?

Click to expand...

If it isn't bridged the RGBS only goes to the encoder, with it bridged it goes to the encoder and the cab/supergun.

the spots to bridge are the circled ones right?

so without bridge .. you don't have signal to cab.

but what about bridging and splitting the signal in two?
is there any problem?

ok i do outing.

I have a similiar box.. that works pretty similar yours.
but i got a problem.
The image shown on the tv is awesome.. while the cab display something like this
http://img190.imageshack.us/img190/5232/43246653.jpg

so i suppose i have the bridge. but something with the sinc maybe is missing..
is that? or what else?

Looks like it's completely missing the sync or possibly video ground.

And yes what I meant by bridging was splitting the RGBS to both the encoder and to the other side of the connector.

many many thanks for the help Xian.
i have some clues to lead me now..

this thing was drivin me crazy

Xian Xi said:

Yes it does. This one is no longer available but they're easy to make.

Click to expand...

Did you sell it or just decided to keep it?

Traded it off to someone. I'm glad it's got a good home.

I would have bought this yesterday if I had seen it posted over at KLOV. Took a while to make the connection as to why your name looked familiar. I bought that SFII board from you a while back. How much was that JROK adapter?

Edit: lol, nevermind I noticed the original post was from March! Way to bump old topics folks.