Green Screen on Phoenixed CPS2 Board?

Hello all,

I've got a Phoenix Edition MSH that was working earlier in the day, then maybe an hour or so later I power it on and only get a green screen (several tries). I've read this could be a symptom of other things, one being bent pins on the motherboard (they appear ok, plus I swapped it out for a non-Phoenixed COTA and it worked fine). What other things could be happening here, and can they be fixed?

Thanks for reading.

Try this experiment. Open up the MSH and remove the pcb, then attach the bare pcb to the A board and see if it works.

That worked, thank you! At least I know it isn't broken.

Standard connector problem, you need to apply pressure to the center and not just the corners of the B board when its in the shell when connecting it to the A board

mainman said:

Standard connector problem, you need to apply pressure to the center and not just the corners of the B board when its in the shell when connecting it to the A board

Click to expand...