msu89dawgs
Hardened Shock Trooper
- Joined
- Feb 12, 2004
- Posts
- 434
SOLD
I was digging through some boxes in my attic, and came across some parts that I had intended to build a supergun with a few years back. Just to clear them out, I'd like to sell them as a group, cheap. I have no clue what these are worth to anyone, so shoot me an offer if you're interested.
Here's what's included:
1. Jameco SC200 power supply - includes female four-pin power connector to wire to JAMMA harness, or to PCB if you want to make a dedicated system supergun. I was intending to use this with a Neo-Geo board, so short +5V, +12V and ground wires have been soldered to the female connector. Easy enough to desolder.
2. Radio Shack 8"x6"x3" project box - holes for many of the connectors, as well as a slot for the JAMMA harness, have already been drilled out. Needs more work to be finished. Needs the screws that connect the top cover to the rest of the box.
3. JAMMA harness - I got this used, all connectors except 9, 11, 26, K, M and d are wired. Plenty of wire on all connectors to work with.
4. AV Connectors - modular s-video (female connector on both ends), composite video, L and R stereo audio connectors included. All RCA connectors have solder points.
5. Green LED power light.
6. Rectangular power switch - 6 connectors, rocker type switch.
7. Radio Shack 6-foot s-video/stereo audio cable.
8. Three 6-foot DB-15 male-female joystick extension cables. New, sealed, great for AES controllers.
Again, not looking for a lot of money out of this stuff, just enough to make it worth my while to ship it and take a little cash out of the deal. I'm NOT willing to break anything up.
I was digging through some boxes in my attic, and came across some parts that I had intended to build a supergun with a few years back. Just to clear them out, I'd like to sell them as a group, cheap. I have no clue what these are worth to anyone, so shoot me an offer if you're interested.
Here's what's included:
1. Jameco SC200 power supply - includes female four-pin power connector to wire to JAMMA harness, or to PCB if you want to make a dedicated system supergun. I was intending to use this with a Neo-Geo board, so short +5V, +12V and ground wires have been soldered to the female connector. Easy enough to desolder.
2. Radio Shack 8"x6"x3" project box - holes for many of the connectors, as well as a slot for the JAMMA harness, have already been drilled out. Needs more work to be finished. Needs the screws that connect the top cover to the rest of the box.
3. JAMMA harness - I got this used, all connectors except 9, 11, 26, K, M and d are wired. Plenty of wire on all connectors to work with.
4. AV Connectors - modular s-video (female connector on both ends), composite video, L and R stereo audio connectors included. All RCA connectors have solder points.
5. Green LED power light.
6. Rectangular power switch - 6 connectors, rocker type switch.
7. Radio Shack 6-foot s-video/stereo audio cable.
8. Three 6-foot DB-15 male-female joystick extension cables. New, sealed, great for AES controllers.
Again, not looking for a lot of money out of this stuff, just enough to make it worth my while to ship it and take a little cash out of the deal. I'm NOT willing to break anything up.
Last edited: