Weird monitor problem

Hey everyone, sorry for asking but I've got another slight problem with my big red 4 slot

I just had a friend do a cap kit and the monitor was looking great for the past couple days. We just moved the cabinet from the garage to downstairs today and I think we might have knocked something loose while moving it (we didn't drop it!).

So here is the problem, when the control panel is flipped 100% open the monitor looks perfect. As you start to shut the control panel (and when it's fully closed) the left and right side of the monitor starts to fade in colour (turns greenish).

Any ideas what could be causing this? It was working perfect before we moved it downstairs.

Check the remote board, it sounds like there may be a loose wire. I had the exact same problem only with the ground. Just wiggle some of the wires around (easily) and see if it does the same thing. It actually sounds like some sort of weird degaussing issue, but try this first.

Yeah, Maybe the degaussing coil moved out of position when we moved it downstairs with the dolly. I will check that also, thanks!