- Joined
- Jan 29, 2004
- Posts
- 20,259
I can't belive I'm doing this, but in truth I'm running out of space and I already have another 2 4 slot MVS cabs, so I'm selling this one 'cause I just added a fabtek vert woddie to my collection and I've been wanting one for a long ass time, however I cannot bring it in 'cause I'm out of room and after lots of thought I decided to sell this cab as I already have a rev 1 and a MVU4.
My goal was to own all the US 4 slot revisions, but I just gotta get a little more practical you know? However I'm only considering decent offers as I can always place it in storage and use it later when I have my basement ready for action.
I've restored the CP completely. The overlay is the original, but it has been covered in plexi and it looks ace, I sanded and painted this sucker long ago and still looks like it just came out of the oven. The monitor looks great but a cap kit wouldn't hurt as it would look so much nicer with it, I've done it to other monitors and it pays in spades.
Everything is clean and the side art is decent enough as there is next to none problems with it, however it is a used cab of course so there are some dings here and there, but nothing obvious to the commoner. The board is in great shape and the cover is minty as hell, the cab comes with manual and there is nothing missing at all except for the Memory card sticker which had to be removed in order to restore the cab, but I'm working on making some stickers for it, so I'll hook you up later with it.
The original CP overlay has a few dings on it, but with the plexi over it you can barely tell, the plexy has a couple scratches from people that don't know what the hell they're playing with, but they are minimal, I'm just an anal retentive fuck that can notice just about anything wrong with...anything!
All the other features not mentioned work prefectly except for the Marquee EL panels as we all know those die after 5 years or so, so no cigar on that, but the memory tray, the credit leds and the coin meachs and lights are all in perfect condition. The PSU is original and so is the monitor, the monitor is extremely sharp, but like I said it could use a cap kit due to some waving that can easily be avoided by turning the brightness down, but again I'm anal and I want everything perfect, so perhaps this is something you can deal with or not.
It is the cab on the right, all controls are new and better yet you have some choices here; I can put 2 super joysticks or 2 sanwa JLW sticks, also for buttons it has convex competitions buttons in it, but if you rather concave I can arrange that no problem, so there you go!
Again only decent offers will be accepted and remember this cab is clean and restored. The bezel is missing in the pic, but I have placed a bezel in there so no worries there.
Here's the CP after restoration.
OK there it is, again keep in mind the price you will pay for a cab like these and then add properly the amount of work done and parts put into it.
Perfect timing for christmass too! I'm in no rush to let this go, so keep that in mind too.
Take care and thank you all in advance for the interest.
My goal was to own all the US 4 slot revisions, but I just gotta get a little more practical you know? However I'm only considering decent offers as I can always place it in storage and use it later when I have my basement ready for action.
I've restored the CP completely. The overlay is the original, but it has been covered in plexi and it looks ace, I sanded and painted this sucker long ago and still looks like it just came out of the oven. The monitor looks great but a cap kit wouldn't hurt as it would look so much nicer with it, I've done it to other monitors and it pays in spades.
Everything is clean and the side art is decent enough as there is next to none problems with it, however it is a used cab of course so there are some dings here and there, but nothing obvious to the commoner. The board is in great shape and the cover is minty as hell, the cab comes with manual and there is nothing missing at all except for the Memory card sticker which had to be removed in order to restore the cab, but I'm working on making some stickers for it, so I'll hook you up later with it.
The original CP overlay has a few dings on it, but with the plexi over it you can barely tell, the plexy has a couple scratches from people that don't know what the hell they're playing with, but they are minimal, I'm just an anal retentive fuck that can notice just about anything wrong with...anything!
All the other features not mentioned work prefectly except for the Marquee EL panels as we all know those die after 5 years or so, so no cigar on that, but the memory tray, the credit leds and the coin meachs and lights are all in perfect condition. The PSU is original and so is the monitor, the monitor is extremely sharp, but like I said it could use a cap kit due to some waving that can easily be avoided by turning the brightness down, but again I'm anal and I want everything perfect, so perhaps this is something you can deal with or not.
It is the cab on the right, all controls are new and better yet you have some choices here; I can put 2 super joysticks or 2 sanwa JLW sticks, also for buttons it has convex competitions buttons in it, but if you rather concave I can arrange that no problem, so there you go!
Again only decent offers will be accepted and remember this cab is clean and restored. The bezel is missing in the pic, but I have placed a bezel in there so no worries there.
Here's the CP after restoration.
OK there it is, again keep in mind the price you will pay for a cab like these and then add properly the amount of work done and parts put into it.
Perfect timing for christmass too! I'm in no rush to let this go, so keep that in mind too.
Take care and thank you all in advance for the interest.


