ShmengeTravel
Mature's Make-up Artist
- Joined
- Nov 1, 2003
- Posts
- 1,372
So I bought the Neo this afternoon (will have it here wednesday, hopefully) and I noticed it needs some wood work to the right of the CP. Now I've done my research, and from what I've seen on these forums it's 50/50, half recommend bondo, half recommend other. Here's what I was thinking:
Take masking tape, run it all along the underside of the t-molding.then, stick a few double sided pieces to the underside of the molding and slap anotherline of masking tape to that, facing the opposite direciton. Kind of like a masking tape sandwhich, with one side sticking to the t molding and the other sticking to the soon-to-be wood. Then take the bondo (or whatever gets recommended), and fill in the missing pieces*with* the t-molding in place. Once the bondo dries, I should be able to take the moulding out as the tape should be what gets stuck to the bondo. This way it fills in the area it needs to fill in, and if I decide to replace the tmolding down the road, I can take it out. Think this'll work? Also I can't seem to find bondo anywhere anymore (home depot, lowes, ace hardware all don't list it).
Take masking tape, run it all along the underside of the t-molding.then, stick a few double sided pieces to the underside of the molding and slap anotherline of masking tape to that, facing the opposite direciton. Kind of like a masking tape sandwhich, with one side sticking to the t molding and the other sticking to the soon-to-be wood. Then take the bondo (or whatever gets recommended), and fill in the missing pieces*with* the t-molding in place. Once the bondo dries, I should be able to take the moulding out as the tape should be what gets stuck to the bondo. This way it fills in the area it needs to fill in, and if I decide to replace the tmolding down the road, I can take it out. Think this'll work? Also I can't seem to find bondo anywhere anymore (home depot, lowes, ace hardware all don't list it).
