DJ Long Cat
Armored Scrum Object
- Joined
- Nov 18, 2007
- Posts
- 251
The left speaker broke and I might as well replace them both. Any kind of special speaker or just some cheap car ones will be alright?
Thanks!
Thanks!
Neo Geo Speakers blown, Where to get some new ones?
- Thread starter DJ Long Cat
- Start date
Armored Scrum Object
- Joined
- Oct 30, 2003
- Posts
- 34,075
It is hard to find shielded 4 ohm speakers... I found some on ebay... But had to find an innovative way to mount them in my neo-29...
ronald0
Crazed MVS Addict
- Joined
- Jan 5, 2007
- Posts
- 142
Happ is selling shielded speakers of different sizes:
http://www.happ.com/interactive/accessories/49022800.htm
Old TV's is another good source.
The impedance (ohm) doesn't have to be exactly the same as the old ones. Do not use too low total impedance however (say, below 4 ohm) as this may damage the amplifier on your PCB. If the speakers are connected in series, you are probably safe.
http://www.happ.com/interactive/accessories/49022800.htm
Old TV's is another good source.
The impedance (ohm) doesn't have to be exactly the same as the old ones. Do not use too low total impedance however (say, below 4 ohm) as this may damage the amplifier on your PCB. If the speakers are connected in series, you are probably safe.
Last edited:
- Joined
- Oct 30, 2003
- Posts
- 34,075
Happ is selling shielded speakers of different sizes:
http://www.happ.com/interactive/accessories/49022800.htm
Old TV's is another good source.
The impedance (ohm) doesn't have to be exactly the same as the old ones. Do not use too low total impedance however (say, below 4 ohm) as this may damage the amplifier on your PCB. If the speakers are connected in series, you are probably safe.
Actually, the multislots can do 2 ohm....
2 ohm is the spec in the documentation..... But I know for a fact that my Neo-29 candy used 4 ohm stock speakers.