LWK needs your help with a cabinet!

YES! I need your guys help. I have a real old neo candy cab with the metal panel, around june I got a new power supply as a birthday gift from a friend. I need someone to tell me where these wires go to my power supply. Also, there is one that goes physically on the cab, if you could open your controller panel and tell me which it is, it'd help, I don't want this thing shocking me no more.

My new power supply, pic reuploaded from lizardlick.



My cab's guts. The gooey stuff I need to direct to those voltages....









This wire has some purpose, help me place it =/

I can probably figure out most of it if someone spots me a picture of there candy cab's psu with the wires attached. Anyone?

MVS-U4-33 is my cabs model.

I think the problem is that most of these candy cabinets use specific PSU's in them with appropriate wiring blocks. Looks like yours has been replaced at some point and the connectors were all cut off to fit it with a US PSU.

best bet would be to trace all those leads and find out where they originate. Hooking up a US PSU is really easy and there are lots of tutorials online that are a great help.

Without being able to look into the cabinet though and to see where what wires are going where I think it will be really hard for anyone to tell you what goes where.

Sorry duder, good luck with it though. 33 monitor rules....

can you point me to a tutorial? Also everything is stock on this cab but the power supply.

this one is pretty good....

http://www.arcadefever.net/how-arcade-work/HOW-WORK-AN-ARCADE.html

Im sure everything is stock indeed... I meant the actual connectors that interface with the original PSU were cut when it was taken out and replaced with those spade connectors.