FS:
2 slot Neo Gold cabinet,the wooden one..(works great,has almost new monitor,new sticks-buttons and CP overlay...Black buttons,Classic Electrigrave design
When I bought the machine the guy had just put in a new 19 monitor...(his-wife paasing had to sell machines)
Wood needs some work-was broken into on location..(most covered up)
The bottom has new type corner protectors..I'm pretty sure I have them on all 4 sides.. and the bottom edges have edge protectors that I put on all my cabs..the bottom started to get messed up when sliding the cab around..
2 slot board works..I don't think the mem card readeer works on the board though
Has correct Power supply,wiring..two mini marquee lights light but are very dim(unplugged)
Coin area switch is all original............no plastic coin box..
Top Coin door locks but it's the same key as my other machines so that'll need to be changed
The bottom lock,the rear pats of the coin door lock(the bar and screw) I think fell in the machine..I went to lock the botton one day and noticed they were off..
I had an isssue with the machine that I posted up about in tech..the monitor went fuzzy,found out it's a flaky pot on the monitors adjustment board=the small pcb connected via a wire to the inside side of the cab..not directly on the monitor itself..
So if for some reason the monitor went fuzzy just have to bumb that pot..most likely just needs to be cleaned-I have no time to do it.
I fire up the cab on a regular basis and this doesn't happen..it seems to happen when I bump the pot changing games..
NO MVS GAMES INCLUDED.
...............................
Atari KLAX
Mini Klax cab...Original Galaga cabinet,top marquee under the Klax is still Galaga..lots of bottom of machine parts inside still Galaga
I bought it as converted to MK..found out later it was originally Galaga,but I can't afford to restore it..
very solid-heavy little cabinet..old cabinet
New Klax overlay..
The game works but it could use a monitor as it has it's original 13" in it..
I've had MVS,CPS2,TAITO F3,Misc Jamma boards in this machine..
Got tired of switching it around,made it into a Klax..
Plays well enough for my wife to play it,another reason why I made it KLAX..
BOTH CHEAP!!!!!Make Offer..
I can't deliver them...You'd have to come pick them up"outside" my place on an the evening.(NJ)..I can get both cabs outside..I also can run a wire and turn them on..
Don't want to piss off my landlords too much so once outside NO BSIF YOU OFFER A PRICE AGAIN NO BS,NO HAGGLE Take them AS IS>>
Will add pics when I get a chance
__________________
2 slot Neo Gold cabinet,the wooden one..(works great,has almost new monitor,new sticks-buttons and CP overlay...Black buttons,Classic Electrigrave design
When I bought the machine the guy had just put in a new 19 monitor...(his-wife paasing had to sell machines)
Wood needs some work-was broken into on location..(most covered up)
The bottom has new type corner protectors..I'm pretty sure I have them on all 4 sides.. and the bottom edges have edge protectors that I put on all my cabs..the bottom started to get messed up when sliding the cab around..
2 slot board works..I don't think the mem card readeer works on the board though
Has correct Power supply,wiring..two mini marquee lights light but are very dim(unplugged)
Coin area switch is all original............no plastic coin box..
Top Coin door locks but it's the same key as my other machines so that'll need to be changed
The bottom lock,the rear pats of the coin door lock(the bar and screw) I think fell in the machine..I went to lock the botton one day and noticed they were off..
I had an isssue with the machine that I posted up about in tech..the monitor went fuzzy,found out it's a flaky pot on the monitors adjustment board=the small pcb connected via a wire to the inside side of the cab..not directly on the monitor itself..
So if for some reason the monitor went fuzzy just have to bumb that pot..most likely just needs to be cleaned-I have no time to do it.
I fire up the cab on a regular basis and this doesn't happen..it seems to happen when I bump the pot changing games..
NO MVS GAMES INCLUDED.
...............................
Atari KLAX
Mini Klax cab...Original Galaga cabinet,top marquee under the Klax is still Galaga..lots of bottom of machine parts inside still Galaga
I bought it as converted to MK..found out later it was originally Galaga,but I can't afford to restore it..
very solid-heavy little cabinet..old cabinet
New Klax overlay..
The game works but it could use a monitor as it has it's original 13" in it..
I've had MVS,CPS2,TAITO F3,Misc Jamma boards in this machine..
Got tired of switching it around,made it into a Klax..
Plays well enough for my wife to play it,another reason why I made it KLAX..
BOTH CHEAP!!!!!Make Offer..
I can't deliver them...You'd have to come pick them up"outside" my place on an the evening.(NJ)..I can get both cabs outside..I also can run a wire and turn them on..
Don't want to piss off my landlords too much so once outside NO BSIF YOU OFFER A PRICE AGAIN NO BS,NO HAGGLE Take them AS IS>>
Will add pics when I get a chance
__________________
Last edited:







