WTB: mini-cute cp overlay scans

Hi all. I'm trying to put the finishing touches on my mini-cute restoration. I need full-size (exacting dimensions), full-color scans of all the polycarbonate elements (the cp overlay, the coin-slot graphic, the speaker overlay) of the mini-cute. I also need dimensions for the marquee header.

Unfort., a family member threw away all the polycarbonates I was using as reference.

I realize that no one is going to want to strip the polycarbonates off and scan them, I'd suggest perhaps just taking the lid off a scanner and pressing it up to the cabinet?

Please pm me, email me the scans, give me a day or two to make sure they're of exacting dimensions, and I'll paypal you $20. $5 for the marquee header dimensions. THnx!

bump? All I need is the scans.

Press the scanner to the cabinet....???

Not the best solution but I've done similar and it works.

$20 for an hrs worth of work... That's like half a tank of gas!

You couldn't even get me to get out of my bed for 20 bucks!! Ruffles!

Why don't you just be patient and wait for some of the overlays I'm working on. I have a Q25 and a Mini-Cute in WIP status plus a few other things, so sit tight and stop bumping this retarded idea of pushing the scanner against the cab.

20 half a tank of gas??? What do you drive a freaking scooter or something?

Hey kidding aside just check on the overlays everynow and then and you'll be all set.

"stop bumping this retarded idea of pushing the scanner against the cab."

If you remove the speaker grills and the cp plate the stickers are nearly flush. So unless your scanner has a mecury switch that stops it from working at anything other than level, it'll work for my purposes. I rly only need the dimensions of the stickers and the designs. I can color correct from photos I took. The sooner I finish, the sooner I can stop paying on storage.

I'm not necessarily bumping the idea of pushing a scanner against the cab, I'm bumping the need for sticker reference.

Speaking of wickedRetarded(.com) plz plz plz admit to this being your "handi" work...

http://www.wickedretarded.com/~crapmame/1.html

Ruffles!

No, but it is just as retarded as the scanner idea though. Get that sucker out of storage and start measuring.

Same taste in music though, eh?

"Why don't you just be patient and wait for some of the overlays I'm working on"

Done yet?

Yep, they are done. Did you actually expected me to come looking for you?! OK so first we must prove that your brain is not working erractically like on them previous posts, then you can send me a PM with your email and I will send you a PDF which you can get printed or better yet I can guide you on the right direction to have someone print it on a nice prophepylene which is durable and feels very close to the original.

OK sir, prove away.