I'm in the middle of refurbishing a Namco Ridge Racer sit down cab. When I obtained it the monitor chassis was faulty (plus several other minor electrical faults). The unit was incomplete and partially in pieces.
Over the last few weeks I have reassembled, sorted out, seriously cleaned and replaced, repaired and obtained advice. I can't take all the credit, there is a local TV repair guy who's been doing his utmost to get a signal out of the chassis and this is as far as we have managed to get.
A tech at Namco in the UK has also been very helpful, but obviously ANY advice from those used to dealing with this sort of thing is really welcome.
This is the current output. Any ideas where to look next?
Over the last few weeks I have reassembled, sorted out, seriously cleaned and replaced, repaired and obtained advice. I can't take all the credit, there is a local TV repair guy who's been doing his utmost to get a signal out of the chassis and this is as far as we have managed to get.
A tech at Namco in the UK has also been very helpful, but obviously ANY advice from those used to dealing with this sort of thing is really welcome.
This is the current output. Any ideas where to look next?
