modding a dc stick to play on the neo

okay i need to know how to mod a dc stick to play on the neo, i have the sega brand stick with the green buttons, an green ball at the end of the stick, and i need to know where a faq for modding it is, and some detailed photos. if anyone has or is a wealth of information on this please let me know.

there isn't much involved.
open it up. cut off all cables near the small connector board, unscrew and remove it. find the ground wires (the one that gets connected to ALL buttons, and another for all directions). connect them together and to the ground pin on the neo connector.

then connect the remaining wire of each button and each direction to the proper pin on the neo connector.

for the pinout, look at <a href="http://www.gamesx.com" target="_blank">http://www.gamesx.com</a>

This is the best modding thread ever:

<a href="http://www.neo-geo.com/ubb/ultimatebb.php?ubb=get_topic;f=5;t=002329;p=1" target="_blank">http://www.neo-geo.com/ubb/ultimatebb.php?ubb=get_topic;f=5;t=002329;p=1</a>

Then info you are looking for is in the first post, well there is a link to it anyway.

can't i just mod it with a db15 connector?

Kim _Kaphwan:
can't i just mod it with a db15 connector?

Click to expand...

yea, you can probably just splice into the wires that are allready there sou you can use it with your dc aswell.

just buy a pc joystick extension cable and plice em together

mine's <a href="http://www.geocities.com/doughs_page/games/dcstick/dcstick.html" target="_blank">here</a>

badass, doughboy you've just inspired me to do what you did.