SSVS MVS kit and Irritating Maze - Taking offers before ebay - Pics inside

RamonG

RamonG

World Soccer '96
Rating - 100%
36   0   0
Joined
Jun 12, 2004
Posts
122
Ok guys here are the pictures of a Samurai Shodown V Special MVS kit and Irritating Maze. It pains me to have to sell them, but bills are bills.

Please send me offers. Thank you.

Samurai Shodown V Special:

ssvs2.jpg


ssvs3.jpg


ssvs4.jpg


ssvs5.jpg


ssvs6.jpg


ssvs7.jpg


And Irritating Maze:

irrit1.jpg


irrit2.jpg


irrit3.jpg


irrit4.jpg
 
wana10

wana10

n00b
Rating - 100%
1   0   0
Joined
Feb 4, 2008
Posts
23
forgive a noob for asking, but what's the extra pcb in the iritating maze pic?
 
RamonG

RamonG

World Soccer '96
Rating - 100%
36   0   0
Joined
Jun 12, 2004
Posts
122
wana10 said:
forgive a noob for asking, but what's the extra pcb in the iritating maze pic?
Click to expand...

You are gonna laugh at me, but I never used that pcb, I only played the game until recently using razoola's unibios. I got the kit around 3-4 years ago, and for the longest time I never used it, I just kept in the box.

And thanks for all the interest guys, I'm going through the Pm's now, I haven't been around because of midterms, but now I'm in spring break:buttrock: . There is one offer for $300 for the SVSS kit.
 
madman

madman

Blame madman, You Know You Want To.,
Rating - 100%
120   0   0
Joined
Jun 1, 2007
Posts
7,518
I imagine the extra board is for the trackball hookup and to activate the air compressor(s).
 
Pas

Pas

Camel Slug
Rating - 100%
60   0   0
Joined
Mar 4, 2007
Posts
507
madman said:
I imagine the extra board is for the trackball hookup and to activate the air compressor(s).
Click to expand...

Its definatly the trackball interface. As for the air compressors and lights its part of the equasion. According to the schematic it looks as if there are daughter cards to run the lights and compressors in a dedicated cab...I have yet to find anyone with a dedicated cab willing to take a look and possably some good pics of the boards. Personaly I would love to reproduce the extra daughter cards so people could make full conversions with light, air, everything. But yes the extra board is the trackball interface...however I have not tried but as I understood it you needed a board with a special bios to make proper use of it even with the daughtercard (unless you play with a stick through the unibios). So you would have to either find one of the original IRMaze MV1B boards or slap an IRMaze bios chip into another 1slot to use the daughtercard and trackball interface. I will have to try that out one of these days to be posative though.
 
MKL

MKL

Basara's Blade Keeper
20 Year Member
Rating - 100%
13   0   0
Joined
Mar 8, 2002
Posts
3,686
Pas said:
But yes the extra board is the trackball interface...however I have not tried but as I understood it you needed a board with a special bios to make proper use of it even with the daughtercard (unless you play with a stick through the unibios). So you would have to either find one of the original IRMaze MV1B boards or slap an IRMaze bios chip into another 1slot to use the daughtercard and trackball interface. I will have to try that out one of these days to be posative though.
Click to expand...

You don't need the special bios to use the trackball, the unibios is enough. Of course you still need the IM interface. Check the stickied thread in tech. You can get the trackball to work on any MVS or AES systems that have controller ports or the dedicated 8-pin connector and with a little mod even on the MV-1FZ and MV-1A.
 
L

Large

, ,
Rating - 100%
7   0   0
Joined
Jan 15, 2001
Posts
174
Pas said:
Its definatly the trackball interface. As for the air compressors and lights its part of the equasion. According to the schematic it looks as if there are daughter cards to run the lights and compressors in a dedicated cab...I have yet to find anyone with a dedicated cab willing to take a look and possably some good pics of the boards. Personaly I would love to reproduce the extra daughter cards so people could make full conversions with light, air, everything. But yes the extra board is the trackball interface...however I have not tried but as I understood it you needed a board with a special bios to make proper use of it even with the daughtercard (unless you play with a stick through the unibios). So you would have to either find one of the original IRMaze MV1B boards or slap an IRMaze bios chip into another 1slot to use the daughtercard and trackball interface. I will have to try that out one of these days to be posative though.
Click to expand...
The trackball itself is missing within your kit.

What's your highest offer on SSVS so far?

Best Regards
Large
 
RamonG

RamonG

World Soccer '96
Rating - 100%
36   0   0
Joined
Jun 12, 2004
Posts
122
Hey guys.
Thanks everyone for all the interest.
The highest offer right now stands at $350.
 
scgon

scgon

Benimaru's Hairdresser
10 Year Member
Rating - 100%
168   0   0
Joined
Jan 20, 2008
Posts
776
payment sent for Sam Sho 5sp

(and bump on the Irritating Maze)
 
You must log in or register to reply here.
Top