hyper64 on normal dedicated 2 slot cab?

hey, i just got my dedicated 2 slot cabinet and have a 4 slot board. i was wondering if i could buy a hyper 64 board, and hook it up to the cabinet. like, is the hyper 64 board able to hook up to the jamma harness and etc? do you guys knw wat im talking about?

You will need -5 volts for the sound op amps on a H64, a dedicated mvs cab will not have -5 wired to the edge connect.
The psu may support -5, if so it would be a simple hook up to the edge connector.

If it is the original PSU, it will:

<a href="http://www.hardmvs.com/html/neg5volt.htm" target="_blank">http://www.hardmvs.com/html/neg5volt.htm</a>

ttooddddyy:
You will need -5 volts for the sound op amps on a H64, a dedicated mvs cab will not have -5 wired to the edge connect.
The psu may support -5, if so it would be a simple hook up to the edge connector.

Click to expand...

I just got my Hyper the other day.
The Japanese Hypers don't use the -5V, at least the later revisions don't use it.

I hooked mine up in a Neo candy cab and didn't have to do a thing for it to work.
You will want to wire a switch up from pin 1 and 15 to get into the test screen on the Hyper boards.

oh ok, thanks a lot u guys

« PESTILENT »:

ttooddddyy:
You will need -5 volts for the sound op amps on a H64, a dedicated mvs cab will not have -5 wired to the edge connect.
The psu may support -5, if so it would be a simple hook up to the edge connector.

Click to expand...

I just got my Hyper the other day.
The Japanese Hypers don't use the -5V, at least the later revisions don't use it.

I hooked mine up in a Neo candy cab and didn't have to do a thing for it to work.
You will want to wire a switch up from pin 1 and 15 to get into the test screen on the Hyper boards.

Click to expand...

Maybe the earlier ones do, heres a manual pdf.
<a href="http://www.daddelkingz.de/manuals/Hyper_64_english.pdf" target="_blank">http://www.daddelkingz.de/manuals/Hyper_64_english.pdf</a>

ttooddddyy:

« PESTILENT »:

ttooddddyy:
You will need -5 volts for the sound op amps on a H64, a dedicated mvs cab will not have -5 wired to the edge connect.
The psu may support -5, if so it would be a simple hook up to the edge connector.

Click to expand...

I just got my Hyper the other day.
The Japanese Hypers don't use the -5V, at least the later revisions don't use it.

I hooked mine up in a Neo candy cab and didn't have to do a thing for it to work.
You will want to wire a switch up from pin 1 and 15 to get into the test screen on the Hyper boards.

Click to expand...

Maybe the earlier ones do, heres a manual pdf.
<a href="http://www.daddelkingz.de/manuals/Hyper_64_english.pdf" target="_blank">http://www.daddelkingz.de/manuals/Hyper_64_english.pdf</a>

Click to expand...

That is correct. I saw that english manual from a thread I had before concerning hooking up the -5V for my H64. A member named Apus informed me later in another thread that his Japanese board didn't require the -5.
When I got my Japanese board the other day it also doesn't need the -5. There isn't even a contact where the -5V is placed on the edge connector of the board.
So it depends on what H64 board revision.
I just got my board new from Vektorlogic, I don't know how many revisions there are, or which ones if any, of the Japanese boards need the -5V.