Atomiswave Consolizing Help need !

Hi guys.....well well well....its me again ..... i need a little help....i will consolize now a Atomiswave system and i have some question before strating...

1-Whats the maximun resolution of this system ?
2-The VGA out works on a LCD/CRT ?
3-I need connect the +5v in the control buttons line ?
4- Power Supply needed ???


Thank you and sorry about many questions !

[]`Macck

Macck said:

1-Whats the maximun resolution of this system ?
2-The VGA out works on a LCD/CRT ?
3-I need connect the +5v in the control buttons line ?
4- Power Supply needed ???

Click to expand...

1-640x480 (VGA mode)
2-The VGA out on the AW doesn't have horizontal and vertical sync, just composite sync. Some monitor don't like that and you will need to separate the csync with an appropriate circuit.
3-not sure what you mean. It's like any other jamma board. Like MVS, etc. If you want to install Neo Geo ports on it and make it compatible with all the Neo controllers, then wire 5v to the appropriate pins of the ports.
4-Get a desktop PSU with dual 5v/12v output with at least 3A on 5V and 1A on 12V. It's possible to get it to work with just 5V but the fan needs to be replaced. I'm currently consolizing an AW this way but don't recommend it if you don't know what you're doing.

Thank you MKL.....

Well...i will do a two special control to the system...i will use the DB15 connector to connect 5 normal buttons + insert coin and start.....the PSU is easy....so i will not change the cooler....and i think i will instal a component video out on this system.....

Well more one time thak you !


[]'Macck