AES3-6 and Y-Plus converter = Problem !

Hi guys....i have here a Neo Pow3 (100Vca) 1000ma and i`m using on a AES3-6.....but i try used a Y-Plus (RGB converter) and using the same powersuply but the system dosent turn ON....the Y-plus converter need +8~+15Vcc and conume 1.5W.....the AES system needed 8w so 9.5W/10Vcc = 950ma......well i will bought another power suply like 10Vcc 2A.

This will work or i do something wrong in the connection ???

[]`Macck

Macck said:

Hi guys....i have here a Neo Pow3 (100Vca) 1000ma and i`m using on a AES3-6.....but i try used a Y-Plus (RGB converter) and using the same powersuply but the system dosent turn ON....the Y-plus converter need +8~+15Vcc and conume 1.5W.....the AES system needed 8w so 9.5W/10Vcc = 950ma......well i will bought another power suply like 10Vcc 2A.

This will work or i do something wrong in the connection ???

[]`Macck

Click to expand...

The Y plus converter has a stand alone power supply.

Well.....i unsolder everything....and the system back to live....so i soldered all again but dosen't soldered the GND video imput.....(yes i think i solder this wire in a wrong place)....so i tested and the system works but the image is not corret.....no matter (composite or s-video).....where is the best place to me get the GND video to Y-plus converter ???

PS:The image still in rotation...
PS2: Yes the powersuply Pow-3 can provide the power for the system and to the y-plus.


[]'Macck

For the price of a Y plus converter you could have gotten a Neobitz.

Yeah...i have here a NeoBitz....but its a component kit...so i will use it on a Atomiswave....by the way the y-plus finaly works fine on these AES......

Thank you Xian Xi ! ! !

[]'Macck