Supergun Schematics

I've decided I'm gonna attempt builidng a supergun. Can anyone here post up some schematics or point me in the right direction.

There's not much of a schematic needed. It's just a matter of getting a jamma harness, power supply and video encoder (if you're not gonna use an RGB monitor). Google around for sites dedicated on building a supergun. The instructions here provide some good info.

andy251203 said:

There's not much of a schematic needed. It's just a matter of getting a jamma harness, power supply and video encoder (if you're not gonna use an RGB monitor). Google around for sites dedicated on building a supergun. The instructions here provide some good info.

Click to expand...

Ya, all you are really doing is running the other end of the harness into an enclosure and using those wires you wire up the joysticks, audio and power. Then take the video signal wires and run them to an encoder. It's the same as building a CMVS except no dedicated board, just a harness.

I saved this from an old thread.

http://www.neo-geo.com/forums/showthread.php?t=143649&highlight=supergun+diagram