Stereo MV-1B Mod Page - *FOUND*

Briggs

Briggs

I'm getting too old for this shit...,
Joined
Oct 30, 2001
Posts
2,276
Awww hell yeah -

<a href="http://homepage3.nifty.com/avant-hier/mv1b/mv1bstereo.html" target="_blank">http://homepage3.nifty.com/avant-hier/mv1b/mv1bstereo.html</a>

If someone does this, I am more than happy to provide a section on hardMVS to host it.
 
S

supergoose

Die Gans,
20 Year Member
Joined
Nov 16, 2001
Posts
4,042
<a href="http://homepage3.nifty.com/avant-hier/mv1b/mv1b-stereo.png" target="_blank">http://homepage3.nifty.com/avant-hier/mv1b/mv1b-stereo.png</a>

THANKS. :)

broken, can you please check your 1c board? i'd like to know, if it has the same spots. thanks.
 
Yodd

Yodd

Iori's Flame
20 Year Member
Joined
Feb 7, 2002
Posts
8,214
supergoose79:
<a href="http://homepage3.nifty.com/avant-hier/mv1b/mv1b-stereo.png" target="_blank">http://homepage3.nifty.com/avant-hier/mv1b/mv1b-stereo.png</a>

THANKS. :)

broken, can you please check your 1c board? i'd like to know, if it has the same spots. thanks.
Click to expand...
Yes I can check this later tonite and post pics if it does have it. Which spots are we looking for exactly?
 
Yodd

Yodd

Iori's Flame
20 Year Member
Joined
Feb 7, 2002
Posts
8,214
Damn. Almost forgot about this thread.


High res pics of the top and bottom of the pcb:

<a href="http://sgrepository.com/stuff/temp/mv1c/high_res/" target="_blank">Linky Dink</a> (2048x1536 pics)

Since I am not 100% sure what I am looking for, I thought I would post some pics for some of the other tech forum members to take a look at and analyze.

<small>[ June 13, 2003, 02:36 AM: Message edited by: broken ]</small>
 
S

supergoose

Die Gans,
20 Year Member
Joined
Nov 16, 2001
Posts
4,042
shit. looks like, there were two different 1b boards. have a look at that one and compare it to the high res pic, that you posted.

<img src="http://homepage3.nifty.com/avant-hier/mv1b/mv1btest2.gif" alt=" - " />

the english page says, that you'd have to use R90 to R92, but i didn't find them on your pics. different layout. frown
 
Yodd

Yodd

Iori's Flame
20 Year Member
Joined
Feb 7, 2002
Posts
8,214
I suppose that the 1b and 1c aren't all that similar then. Bummer.
 
MKL

MKL

Basara's Blade Keeper
20 Year Member
Joined
Mar 8, 2002
Posts
3,686
I think they're similar instead. The corresponding resistors may be numbered differently, of course. you need to carefully examine the MV-1B, see where each trace go (from the resistors) and then compare it with the MV-1C. It's something you do with a tester, not by looking at pics.

BTW, have you noticed that the MV-1C has a voltage regulator in the amp area like multi-slots? Perhaps it's possible to run the board with +5v only...
 
S

supergoose

Die Gans,
20 Year Member
Joined
Nov 16, 2001
Posts
4,042
got the same board as in the instructions, today. (actually, i ordered a mv-1fz, but the seller sent me a 1b.) anyone interested in pictures?
 
S

supergoose

Die Gans,
20 Year Member
Joined
Nov 16, 2001
Posts
4,042
answered. i'll take them within the next two hours. (i'm starving. guess, i'll have to eat something, before i can do anything else. :) )
 
You must log in or register to reply here.
Top