Neo 29" Coin Mech Help

I like my cabs to be 100% working even if I dont use the option and I just got MVS-U4 neo 29"
I searched through all the pages but couldnt find any info On getting the coin mech to work, Its missing a few peices and the coin eject button doesnt work.

From what I can tell it Looks like there is a peice missing between the control panel were the coin goes in, then the to chute were the coin is registered. Here is a picture

One last bump maybe someone will post a pic.

Thanks.

Perhaps somthing like one of these.

http://www.happcontrols.com/cc/mechs.htm

You're missing the entire coin mechanism. What you pictured only has the frame to hold the mech.

You need part #44 or #45 in this picture:


Contact An from Riverservice
http://www.rs2006.co.jp/index_e.html

She's awesome.

-Bill

warmachine said:

Perhaps somthing like one of these.

http://www.happcontrols.com/cc/mechs.htm

Click to expand...

Those will not work, they are for american coin doors commonly found in woodie cabs.

billd420 said:

You're missing the entire coin mechanism. What you pictured only has the frame to hold the mech.

You need part #44 or #45 in this picture:

Contact An from Riverservice
http://www.rs2006.co.jp/index_e.html

She's awesome.

-Bill

Click to expand...

Thanks for the help I thought since it had the coin switch there is just a slot type deal it needed will contect An right away thank you very much.