MV-LED Pinout?

H

halfelite

n00b
Joined
Sep 25, 2006
Posts
21
Im looking for the pinout to the mv-led to hook it up to my 4slot board. Any pictures or someone just saying wich pin goes to wich would be great thanks.
 
H

halfelite

n00b
Joined
Sep 25, 2006
Posts
21
Even just a number scheme from left to right so i know if the wires go in order of or if any of them cross.
 
thechop

thechop

Overtop Pathfinder
Joined
Apr 22, 2007
Posts
101
I think hardmvs may have pdf files for the manuals of most MVS MOBO's;)
 
warmachine

warmachine

n00b
Joined
Oct 25, 2007
Posts
42
The pinout from left to right is the same on both connectors.

P8140013.jpg
 
H

halfelite

n00b
Joined
Sep 25, 2006
Posts
21
Thank you. The hardmvs only has the mobo not the mv-led pinout. Thanks warmachine that helps a lot.
 
warmachine

warmachine

n00b
Joined
Oct 25, 2007
Posts
42
How are you connecting the wires to the board?
Do you have a connector in mind, or are you soldering the
wires directly to the pins?
 
H

halfelite

n00b
Joined
Sep 25, 2006
Posts
21
actuall a pulled the pins out of 3 usb sockets. from an atx case the type that go from the mobo to the front of the case. And the pins are perfect size to fit over the pins on the socket of the board and led. If I could find a good 13 pin connector I would change it. But for now it works. Not the best looking job Here is a picture of the prototype need to clean up the electric tape on the ends.

IMG_0468.gif


IMG_0469.gif
 
MKL

MKL

Basara's Blade Keeper
20 Year Member
Joined
Mar 8, 2002
Posts
3,686
I have the proper JST NH 13-pin connectors. If someone needs a harness I can make them on request, just drop me a PM. I don't sell just the connectors.
 
S

SquallStrife_

n00b
Joined
Aug 24, 2010
Posts
3
Sorry to bump such an old thread, but I still don't seem to be able to create a new one?? (I also figured this particular thread was more suitable to bump than the others, given the question I have! :))


Anyhow, I'm too poor to buy MV-LEDs to go with my MV-1F, so I'm thinking I could build them on prototype board with off-the-shelf bits...

Does anyone know how the Neo communicates with the MV-LED? Is it just x binary bits from the 1P and 2P connectors? Something more complicatd?
 
You must log in or register to reply here.
Top