<img src="http://img.villagephotos.com/p/2003-6/168596/P1010001.JPG" alt=" - " />
Gotta tie down these wires. My preferrers placement for the switch necessitate that I run the wire across like that. Its unfortunate, but this is where I wanted it. Soldered the wires directly to the metal underneath the control pcb
<img src="http://img.villagephotos.com/p/2003-6/168596/P1010009.JPG" alt=" - " />
Looks nice. I like blue lights and big red buttons! A lot.
<img src="http://img.villagephotos.com/p/2003-6/168596/P1010002.JPG" alt=" - " />
Home made Neo joypad using a gutted Genesis pad...well, I just took out the logic chip.
<small>[ June 06, 2003, 12:19 PM: Message edited by: Rade Kuruc ]</small>
Gotta tie down these wires. My preferrers placement for the switch necessitate that I run the wire across like that. Its unfortunate, but this is where I wanted it. Soldered the wires directly to the metal underneath the control pcb
<img src="http://img.villagephotos.com/p/2003-6/168596/P1010009.JPG" alt=" - " />
Looks nice. I like blue lights and big red buttons! A lot.
<img src="http://img.villagephotos.com/p/2003-6/168596/P1010002.JPG" alt=" - " />
Home made Neo joypad using a gutted Genesis pad...well, I just took out the logic chip.
<small>[ June 06, 2003, 12:19 PM: Message edited by: Rade Kuruc ]</small>