PDA

View Full Version : Need Help Sourcing Parts.....



Pages : [1] 2

Xian Xi
06-02-2007, 08:34 PM
I'm trying to locate the items circled below:

Pot Knobs:
http://img530.imageshack.us/img530/4285/bazookabackaltmd2.jpg (http://imageshack.us)

And also looking for these black plastic DB15 panel mount connectors:
http://img236.imageshack.us/img236/6938/lmv1consolizedia9.jpg (http://imageshack.us)

Also need this PSU conector thing as I will be running an internal PSU:
http://img341.imageshack.us/img341/7229/bazookabackalt2pr4.jpg (http://imageshack.us)

Neo Geo MVS
06-02-2007, 10:46 PM
I also would like to know where to get these? Nice thread Xian let me know if someone PM's the information.

danox574
06-03-2007, 10:16 AM
For the AC inlet, when I built mine, I simply gutted a bad PC Power Supply and took that part, but I also found them in the Digi-Key catalog. The key to finding them was looking under 'Power Entry Modules' and going to that catalog page, and then you found a slew of them (both fused and non-fused, so you may find the fused one more useful unless you already have an external fuse holder).

I never did find a red/green/blue knob, but later ran across someone mentioning mouser as the source for those unless my memory has failed me.

I've never seen the plastic DB-15 hoods.

-Dan

Logicdustbin
06-03-2007, 11:24 AM
For the AC inlet, when I built mine, I simply gutted a bad PC Power Supply and took that part


this is what I did, mine also had a nice on/off switch on it as well...

segasonicfan
06-03-2007, 12:12 PM
The AC inlet you can get at Jameco...I bought the exact same part and installed it in my SG too. That's probably where D-Lite got it too, since we both live less than a mile away from the place.

Not sure where to source the other two things...I'd recommend using RGB Bourns thumb knobs anyway (JROK style) but the colors are nice. You can just ask D-Lite when he comes back from being MIA though.

I have a feeling the plastic D subs might have been taken from a broken MV-1, AES or Neo CD. They are definitely not easy to come by elsewhere. Heck, even I have a broken MV-1 and Neo CD. I can gut them and sell em to you if you get really desperate for the part ;)

-Segasonicfan

channelmaniac
06-03-2007, 12:54 PM
/me slaps Xian Xi with a large trout

Your parts kung fu is weak. Gets squashed like grape.

http://www.mouser.com/catalog/630/1517.pdf

Upper left corner of the page.

Granted, they are black with color accent and not grey with accent, but if you do a search with the part numbers for the grey ones it comes back with "non-stocked" items. So if you want grey, it's a special order if you use Mouser.

RJ

Logicdustbin
06-03-2007, 03:07 PM
this is what I did, mine also had a nice on/off switch on it as well...


www.lizardlick.com (http://www.lizardlickamusements.com/images/for_sale/electrical/power_entry.jpg)

P00t
06-03-2007, 03:38 PM
Best to unsolder the controller ports off a dead MVS board, thats what I did once. Or dead AES.

Xian Xi
06-03-2007, 03:42 PM
Best to unsolder the controller ports off a dead MVS board, thats what I did once. Or dead AES.

I have 2 broken AES but I always hated the official DB15 hoods as they arent very tight and I always have to reseat the controller if the cord moves too much.

channelmaniac
06-03-2007, 05:12 PM
Once again, your Search Fu is weak.

http://www.mouser.com/catalog/630/1020.pdf

AMP HDF-20 series connectors (for flat ribbon cable), Mouser part #: 571-1658615-3

That part is the 15 pin DB15 male connector that you crip the wire to the back of. Then take that nice neat looking ribbon cable down to the logic board and solder at will.

The ribbon cable can be had from any floppy or older style IDE cable.

RJ

Xian Xi
06-03-2007, 11:12 PM
Thanks a bunch I actually came across those.

What do you call those RCA plugs that you can solder to and then plug them into something? NOT the panel mount ones. I've been searching under RCA male and havent found it yet.

channelmaniac
06-04-2007, 12:51 AM
Those are "phono" as in phonograph (you know... record players! They had those kinds of hookups)...

Phone plugs are headphone or microphone plugs. (except for those funny 3 pin XLR type microphone plugs)...

That's how I always remember which one is which.

Mouser has tons of 'em... you can use their cool search feature to narrow it down by several different criteria.

You get the impression I like Mouser? ;) hehehehe - Their warehouse is on the other side of the Dallas Metromess from me. I order stuff by cheap 1st class mail and I get it next day.

RJ

Neo Geo MVS
06-04-2007, 01:49 PM
I have said it before and will say it again thank god for channelmaniac. :buttrock:

channelmaniac
06-04-2007, 02:56 PM
Thanks for the pr0pz!

norton9478
06-04-2007, 03:47 PM
For those of you looking for RGB knobs..

Jameco uses the terminology "instrumentation knob"

I prefer the ones in the second row.

http://www.jameco.com/Jameco/catalogs/c253/P154.pdf

Neo Geo MVS
06-08-2007, 01:15 AM
oh, nice job norton :glee:

Xian Xi
12-15-2007, 06:19 PM
Back again.

Anyone know where they sell DB15 hoods EXACTLY like the ones used in a NGCD?

It has to be black, DB15, Right angle with the screw holes for securing to the PCB.

Only ones close I could find were the ones I used in my SG but they aren't PCB mount.

channelmaniac
12-15-2007, 06:37 PM
Mouser.com

Part #: 152-5615
Datasheet: http://www.mouser.com/catalog/specsheets/KC-300657.pdf

152-3315
http://www.mouser.com/catalog/specsheets/KC-300661.pdf

636-182-015-113R531
http://www.norcomp.net/rohspdfs/connectors/18Y/182/182-yyy-113Ryy1.pdf

651-1688081
http://phoenixcon.com/catalog/1688081

523-17EHD-015P-AA000
https://www.amphenolcanada.com/ProductSearch/drawings/AC/17EHD015XXXX00.pdf

There are a few more too... I was being lazy. However, I did include the data sheets so you can see if they are the type and size you want.

RJ

purple
12-15-2007, 06:53 PM
well i have 2 of them pcb mount...but they are white...maybe the day i told you is today...pm me if you are interested

Xian Xi
12-15-2007, 06:56 PM
Thanks RJ, you never cease to amaze me with your parts-fu.

Do you know if they sell DB15 extension cables that have the same female end of the neo controllers? There is a slight difference from the standard DB15 cables. I noticed that the ones on the Neo have a crimp type socket on each pin so it's pretty snug when you plug them in. Other types I have seen are just the regular cylindrical type female pin sockets.

This is probably the reason why when using standard DB15 cables or some controller adapters that sometimes the buttons dont register due to lack of contact.

MKL
12-15-2007, 08:49 PM
Back again.

Anyone know where they sell DB15 hoods EXACTLY like the ones used in a NGCD?

It has to be black, DB15, Right angle with the screw holes for securing to the PCB.

Only ones close I could find were the ones I used in my SG but they aren't PCB mount.

Aren't the NGCD ports identical to the AES ports? And aren't AES ports longer than normal so that if you replace them with standard PC-mount R/A DB15 they will be too recessed even for the long female part of the official controllers? Think about it...

Xian Xi
12-15-2007, 09:13 PM
I'm not talking about the controller ports, I am talking about the pin sockets on the cables for the controllers.

Here's a quick drawing of what the pin sockets look like on an SNK made cable:

http://img267.imageshack.us/img267/8036/neopinsocketsbn5.jpg

The gray/silver represents the metal inside the female socket.

So you can see that the pin sockets on a neo grab the pin from both the left and right side and basically squeeze the pin, where as non-neo cables have a socket around the pin and depending on pin size, sometimes doesnt make great contact.

Hope that clears it up.

MKL
12-15-2007, 09:39 PM
I was replying to post #17, not #20.

channelmaniac
12-15-2007, 09:58 PM
Thanks RJ, you never cease to amaze me with your parts-fu.

Do you know if they sell DB15 extension cables that have the same female end of the neo controllers?

Thanks!

No, unfortunately I don't know that one.

Raymond

FairlanePhantom
12-15-2007, 10:09 PM
If you have a True Value hardware store around, they also have an assortment of knobs in their parts section.

Xian Xi
12-24-2007, 07:42 PM
I have an idea. I remember once in school we had these DB15 connectors that had no pins and we had to cut our own wire to make the pins. I think it was brass or so.

Does anyone know where you can buy this wire to make the pins with? This way I can just make the pins a little longer on the NGCD ports.

Xian Xi
03-14-2009, 01:41 PM
5 pin din jack:

Mouser part #502-61GB5FX

http://img72.imageshack.us/img72/3522/5pindin.tif

http://www.mouser.com/Search/ProductDetail.aspx?qs=sGAEpiMZZMsUzhEcHltCuQVGZDbU 2xeG

Xian Xi
03-17-2009, 11:17 AM
For the gold video jacks:

http://www.minute-man.com/acatalog/index.htm $20 min order.

Philmore # MSG12 RED
Philmore # 45-270 BL
Philmore # 45-270 GR
Philmore # 45-270 YEL
Philmore # 45-270 WH
Philmore # 45-270 OR

xiao_haozi
03-17-2009, 11:48 AM
For the gold video jacks:

http://www.minute-man.com/acatalog/index.htm $20 min order.

Philmore # MSG12 RED
Philmore # 45-270 BL
Philmore # 45-270 GR
Philmore # 45-270 YEL
Philmore # 45-270 WH
Philmore # 45-270 OR

Great find!

Xian Xi
04-07-2009, 04:55 PM
Where can I find those black anodized machine bolts?

xiao_haozi
04-07-2009, 04:59 PM
CCS (http://www.ccs.com/) should have them in their hardware section.

Xian Xi
04-07-2009, 05:01 PM
Hmm, ya but I need ones with a flat or smaller head.

xiao_haozi
04-07-2009, 05:11 PM
Hmm, ya but I need ones with a flat or smaller head.

These should be flat such as this guy (http://shop.ccs.com/catalog/productdetail/model_nbr--113569/sku--61-31842/supercat--Skate/cm--/#sku=61-31842&size=1)... cause they have to sit flush.

I think those are also similar to the ones that someone had posted a guide for modding the old style sticks with.... (i'll have to search back for that one)

Xian Xi
04-12-2009, 05:49 AM
Few more parts:

AES Power Jack:

Mouser #163-179PH-EX
http://www.mouser.com/images/kobiconn/images/161-7214-E.jpg

Xian Xi
04-17-2009, 06:02 AM
Since a lot of places discontinued Gold S-vid panel mount jacks this is another way to make one

Gold S-video jack:

http://www.minute-man.com/acatalog/S_VHS_Plugs_and_Jacks.html

Part #30-618, get this and hack off the small tab.

Then use the nut from this:

http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10426&cs_id=1042602&p_id=2993&seq=1&format=2

So you are looking at a total of around $5-6 for the s-video jack. Not exactly economical but an alternative.

duo_r
04-19-2009, 01:35 AM
Anyone interested in a group order for the DIY S-video connector? I will buy like 5 or 6 then you guys just pay the cost plus ship and paypal fee? Lemme know cause I could use one but don't need to spend $20.



http://www.minute-man.com/acatalog/CALRAD30-618.jpg



Since a lot of places discontinued Gold S-vid panel mount jacks this is another way to make one

Gold S-video jack:

http://www.minute-man.com/acatalog/S_VHS_Plugs_and_Jacks.html

Part #30-618, get this and hack off the small tab.

Then use the nut from this:

http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10426&cs_id=1042602&p_id=2993&seq=1&format=2

So you are looking at a total of around $5-6 for the s-video jack. Not exactly economical but an alternative.

Xian Xi
04-19-2009, 02:14 AM
Found another place with possibly better stock:

$3.15 each but no multi discount, I don't know if that's all they have or their cart is just setup that way. Even at 100 units it's still $3.15

http://www.ramelectronics.net/audio-video/wallplates-a-v/keystone-jack-inserts-plates/keystone-jack-inserts/s-video-keystone-insert-72-313g/prod72313G.html

duo_r
04-19-2009, 02:17 AM
Xian,

if you buy a bunch I will pick up a couple from you. The shipping is just retarded for 1 unit, like $7.50 shipped to my house (minimum).


Found another place with possibly better stock:

$3.15 each but no multi discount, I don't know if that's all they have or their cart is just setup that way. Even at 100 units it's still $3.15

http://www.ramelectronics.net/audio-video/wallplates-a-v/keystone-jack-inserts-plates/keystone-jack-inserts/s-video-keystone-insert-72-313g/prod72313G.html

Xian Xi
04-19-2009, 02:20 AM
Hmmm, thing is someone has to make sure behind that plastic is a removable nut like I'm hoping. If it is that would be perfect. You don't want to buy 20 and they're not.

Who's in Jersey, Hmmm Soniku.

duo_r
04-20-2009, 03:18 AM
I am going to attempt to hack the monoprice s-video connector, worth a shot for me.....

and that plastic cover should be removable, how is someone supposed to solder to it with a wire??? I would be 99% sure it is possible.


Hmmm, thing is someone has to make sure behind that plastic is a removable nut like I'm hoping. If it is that would be perfect. You don't want to buy 20 and they're not.

Who's in Jersey, Hmmm Soniku.

Xian Xi
04-20-2009, 03:39 AM
Hey Duo,

How many did you need of the ram electronics s-vid jack?

duo_r
04-20-2009, 03:46 AM
I would grab two of those.

Xian Xi
04-20-2009, 01:50 PM
Ok, I got confirmation from THomas at Ram Electronics and he said yes the back is a hex nut.

xiao_haozi
04-20-2009, 02:01 PM
so...you don't need me to make a run?

Xian Xi
04-20-2009, 02:02 PM
Nope, not anymore but thanks.

xiao_haozi
04-20-2009, 02:09 PM
Sure thing...

Did you find those black screws you were looking for? I was planning to use some them as well and was going to head to the skateboard shop near my house... I can check to see how flat the heads are on those if you are still looking.

Xian Xi
04-20-2009, 02:12 PM
I just went with electric guitar screws. I forgot to check the length though. We'll see when I get them.

Vectorman0
04-20-2009, 03:02 PM
Please let us know how the RAM s-video jack (http://www.ramelectronics.net/audio-video/wallplates-a-v/keystone-jack-inserts-plates/keystone-jack-inserts/s-video-keystone-insert-72-313g/prod72313G.html) is. Also, what black plastic DB-15 ports did you end up using using?

Xian Xi
04-20-2009, 03:37 PM
Please let us know how the RAM s-video jack (http://www.ramelectronics.net/audio-video/wallplates-a-v/keystone-jack-inserts-plates/keystone-jack-inserts/s-video-keystone-insert-72-313g/prod72313G.html) is. Also, what black plastic DB-15 ports did you end up using using?

For the DB15 ports I use:

Mouser Part #571-1658615-3

duo_r
04-21-2009, 01:56 AM
very cool, are you going to get some?


Ok, I got confirmation from THomas at Ram Electronics and he said yes the back is a hex nut.

Xian Xi
04-21-2009, 02:33 AM
At this time I actually don't need any so I can't justify the purchase right now.

buaku
04-21-2009, 06:00 PM
You could check a Lowes or Home Depot type store for them. I've seen keystone jacks there in the past. Their websites turn up nothing, but their website searches blow in general.

Xian Xi
04-24-2009, 05:56 PM
Anyone know where they sell like a 2 pin plug male and matching female socket?

Looking for something really small around the size of 1 quick disconnect plug but with 2 pins instead. Max voltage would only be +5v.

MKL
04-26-2009, 08:38 AM
Anyone know where they sell like a 2 pin plug male and matching female socket?

Looking for something really small around the size of 1 quick disconnect plug but with 2 pins instead. Max voltage would only be +5v.

http://img.auctiva.com/imgdata/9/8/0/8/1/7/webimg/257744378_o.jpg

There's tons of that on ebay if you search for JST. It's nice because they're already assembled so you don't have to crimp but the wires aren't very long (ca. 150mm). If you need longer wires let me know and I'll think of something else. Here's the datasheet so you can check the specs:

http://www.jst-mfg.com/product/detail_e.php?series=521

xiao_haozi
05-03-2009, 03:01 AM
For the DB15 ports I use:

Mouser Part #571-1658615-3

ouch $6.15 ... wanted to grab some black ones but that's a lot more than my 75 cent jameco guys... hahhah

xiao_haozi
05-05-2009, 05:16 PM
Have this PSU: http://mutaku.com/psu-sm.png (http://mutaku.com/psu.png) (click for big)

Any suggestions on hooking up those molex (2 in and 6 out)... prefer to order things from jameco to put on my existing order.

Was thinking of doing individual molex guys to each pin rather than a block (rect.) connector, but what would be best to handle a high enough gauge for that AC line input etc.?

Thanks!

buaku
05-05-2009, 06:10 PM
Have this PSU: http://mutaku.com/psu-sm.png (http://mutaku.com/psu.png) (click for big)

Any suggestions on hooking up those molex (2 in and 6 out)... prefer to order things from jameco to put on my existing order.

Was thinking of doing individual molex guys to each pin rather than a block (rect.) connector, but what would be best to handle a high enough gauge for that AC line input etc.?

Thanks!

From poking around the molex site the terminals that would fit inside those connectors are rated at 7A for 18ga wire.

The terminals should be Molex #08-70-1030, and the housing should be Molex #09-50-1021 for the 2P and 09-50-1061 for the 6P. I wasn't seeing the terminals on the jameco site.

I'm not sure if they make single pin connectors of that style. I'm sure you could whip something up though.

I used some like $18 amphenol connectors to hook up some of my stuff. Only thing I found that could handle high currents.

What do you plan on powering with this thing, and what kind of power does it output?

xiao_haozi
05-05-2009, 06:31 PM
From poking around the molex site the terminals that would fit inside those connectors are rated at 7A for 18ga wire.

The terminals should be Molex #08-70-1030, and the housing should be Molex #09-50-1021 for the 2P and 09-50-1061 for the 6P. I wasn't seeing the terminals on the jameco site.

I'm not sure if they make single pin connectors of that style. I'm sure you could whip something up though.

I used some like $18 amphenol connectors to hook up some of my stuff. Only thing I found that could handle high currents.

What do you plan on powering with this thing, and what kind of power does it output?

Thanks! Ill see what I can find like that.

For a Hyper64 (rev 1) board. The psu is this one here (https://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&langId=-1&catalogId=10001&pa=194889&productId=194889).

buaku
05-05-2009, 06:49 PM
Thanks! Ill see what I can find like that.

For a Hyper64 (rev 1) board. The psu is this one here (https://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&langId=-1&catalogId=10001&pa=194889&productId=194889).


Ahh cool.

Poke around this thread...
http://www.neo-geo.com/forums/showthread.php?t=193868&page=3

I was asking about connectors that could handle high amounts of current. I'd like to find something better than the big ass amphenol connectors. They're like an inch in diameter :P

Xian Xi
05-26-2009, 04:43 AM
Industrial usually means big dollars.

Vectorman0
05-27-2009, 01:01 PM
Souriau provides connectors for several applications. Try these sources and check their products.
http://www.souriau.com/index.php?id=624
http://www.souriau.com/index.php?id=456
http://www.souriau-industrial.com/en/product_ranges_overview

Smith

Spam?

DewmanSNK
06-01-2009, 11:36 AM
Found another part number for Plastic, DB15, solder-style connectors

They are a Tyco Connector
Part #
5208007-2
or
208007-2 (non 6 ROHS - more expensive in my searching)

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=A34007-ND

xiao_haozi
06-01-2009, 11:42 AM
BUMP!

Just found a great source for Plastic, DB15, solder-style connectors
And they are <$5.00 each.

http://www.ttiinc.com/page/search_advpart.html?partsNumber=5208007-2&mfgShortname=TYC


They are a Tyco Connector
Part #
5208007-2
or
208007-2 (non 6 ROHS - more expensive in my searching)
:buttrock:

Awesome! Great find.. :buttrock: Was just looking this past week for some black ones as well.

xiao_haozi
06-05-2009, 08:28 PM
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=A34007-ND

Got mine in today... picked up a bunch of these. Good price. Thanks NeoGeeO.

Only thing with these are they aren't solder cup... just straight pins out of the back. Wonder if I can just get some crimp straight connectors.

Think the next time I might just go for the ones that already have the flat cabling attached.

Xian Xi
06-23-2009, 06:35 PM
Can we get this thread stickied?

Xian Xi
07-02-2009, 04:30 AM
For the aluminum standoffs they are also called hex spacers.

The size I use are 4-40 1/2" and the OD is .187. You can get them at mouser.

GSL
07-04-2009, 01:50 AM
5 pin din jack:

Mouser part #502-61GB5FX

http://img72.imageshack.us/img72/3522/5pindin.tif

http://www.mouser.com/Search/ProductDetail.aspx?qs=sGAEpiMZZMsUzhEcHltCuQVGZDbU 2xeG

For anyone else with a SC200-style power supply: THIS IS NOT THE PART YOU NEED! I just ordered it without thinking and didn't realize the pins for this connector were arrayed in a 240-degree arc, whereas the power supply's pins are in a 180-degree arc. The proper part you need is the 502-57GB5FX (http://www.mouser.com/Search/ProductDetail.aspx?R=57GB5FXvirtualkey50210000virt ualkey502-57GB5FX).

Jagull
07-12-2009, 11:07 PM
http://www.daleproaudio.com/

free shipping promo going on

able to get a 5-pin DIN connector for 53 shipped

Xian Xi
07-12-2009, 11:12 PM
That's a deal if you live in the 48.

Alaska and Hawaii again left out.

Vectorman0
07-20-2009, 04:29 PM
What power supplies are everyone using for 2-slots or 4-slots these days?

xiao_haozi
07-20-2009, 04:32 PM
What power supplies are everyone using for 2-slots or 4-slots these days?

These guys will work with the 2 slot here (https://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&productId=1946121&catalogId=10001&storeId=10001&krypto=CMF4gzkADQxxj3r9%2BdbaPdGAfPQ%2F9w5ypWKPX37 ZU0YsWTYdQLXQuXeOllPHMElKq2QbuS0e0XQ%3D&ddkey=https:StoreCatalogDrillDownView)

Xian Xi
07-20-2009, 07:10 PM
What power supplies are everyone using for 2-slots or 4-slots these days?

The ones I have in my store I use on all my CMVS units for the 2 slots +5v@3A. You can get them all over the net. For a 4 slot you need something with more amps though at least 6.

Is this for consolization project?

P00t
07-20-2009, 10:10 PM
Anyone found a good source for S-Video Sockets? Jeff Linked me to a Keystone one, but the postage was OTT, then I found a decent priced one, then found out its double ended.

Xian Xi
07-20-2009, 10:13 PM
Anyone found a good source for S-Video Sockets? Jeff Linked me to a Keystone one, but the postage was OTT, then I found a decent priced one, then found out its double ended.

http://www.neo-geo.com/forums/showpost.php?p=2710194&postcount=37

I have a couple, too. I can ship it in the same box as another item if you buy something off my site...lol

P00t
07-20-2009, 10:26 PM
http://www.neo-geo.com/forums/showpost.php?p=2710194&postcount=37

I have a couple, too. I can ship it in the same box as another item if you buy something off my site...lol

Hah yeah, those are the ones Kurtz linked me to, they wanted $60+ just for shipping for 10. Jeff did offer to get me some next time he makes an order, but he doesn't need any yet. Thanks for the link though.

Vectorman0
07-21-2009, 12:50 PM
Is this for consolization project?

Yep, I have a 2-slot I want to consolize. I had thought about trying to get an arcade power supply or even just a 5V open frame power supply between the top of the PCB and the metal shield, but it seems like an external adapter is still the best option for a 2-slot.

P00t
07-21-2009, 01:38 PM
Yep, I have a 2-slot I want to consolize. I had thought about trying to get an arcade power supply or even just a 5V open frame power supply between the top of the PCB and the metal shield, but it seems like an external adapter is still the best option for a 2-slot.

You'd be better off trying to find one of those desktop power supplies we all used to use for coonsolized units. They had a 5 pin din plug and provided +5V, +12V and 2 Grounds, only problem is, they are bloody hard to find now days.

Xian Xi
07-21-2009, 03:00 PM
You only need to run it with +5v only. Just do the +5v mod and you don't need a clunky PSU.

Mike_Decay
07-24-2009, 01:32 AM
Gold RCA panel mount jacks...solder type. 75 cents a piece, no minimum order.

http://www.action-electronics.com/audioconnectors.htm

A little over half way down the page.

I bought one of each color except black...2 of the red. Came to $8 even including shipping from California to Ohio.

Mike_Decay
07-24-2009, 01:39 AM
Take a look at this and tell me what you think? Tabletop PSU with 3 outputs...+5v, +12v, and -5V. (on the first model) Plus uses a DIN 5 pin plug. Would this be able to be used for Superguns, or would the amps be too low? PDF format!!

http://www.meanwell.com/search/p50t/default.htm

dogworth
07-27-2009, 11:32 PM
anyone know the part # for the hyper 64 sound header connector or who makes it? i'm not interested in soldering anything to the motherboard.

Xian Xi
07-28-2009, 02:52 AM
anyone know the part # for the hyper 64 sound header connector or who makes it? i'm not interested in soldering anything to the motherboard.

Which hyper?

Xian Xi
07-28-2009, 06:22 AM
8 pin din socket from jameco. For making an AES style AV socket.

Part number #15861

dogworth
07-28-2009, 07:39 AM
rev 2 fighting board

MonoTekETeA
07-28-2009, 11:03 AM
This thread is a dream come true, thank you guys. I will post stuff if I find any.

Xian Xi
07-28-2009, 12:38 PM
rev 2 fighting board

I remember someone saying it was a JST model. What are you using it for?

dogworth
07-28-2009, 07:53 PM
jvs cab that has rca inputs. the jamma to jvs adapter doesn't play nice with the stereo on the jamma edge. i've made an adapter for all my other boards except the hyper. with a part number i should be able to get a sample from jst.

Xian Xi
07-28-2009, 09:13 PM
You can always switch the rev 2 to jamma by the flip of a switch under the board.

garou81
07-29-2009, 05:14 PM
man this thread is a godsend
sticky please!!!

MonoTekETeA
07-31-2009, 12:15 PM
Taking a look at that Dale Pro Audio site, and they have some decently priced ($1.37), high quality looking phonos there, free shipping, no minimum order too! Also, as far as I know, Neutrik makes some good stuff. Figured I would contribute what I could, check it out! (Doh! Blue is out of stock.)

Black:
http://store.daleproaudio.com/Items/neut-nys3670?&caSKU=neut-nys3670&caTitle=Neutrik%20NYS367-0%20Jack%20RCA%20-%20Panel%20-%20Gold%20-%20Black
Red:
http://store.daleproaudio.com/Items/neut-nys3672?&caSKU=neut-nys3672&caTitle=Neutrik%20NYS367-2%20Gold%20Plated%20Phono%20Panel%20Socket%20-%20Red
Yellow:
http://store.daleproaudio.com/Items/neut-nys3674?&caSKU=neut-nys3674&caTitle=Neutrik%20NYS367-4%20Gold%20Plated%20Phono%20Panel%20Socket%20-%20Yellow
White:
http://store.daleproaudio.com/Items/neut-nys3679?&caSKU=neut-nys3679&caTitle=Neutrik%20NYS367-9%20Gold%20Plated%20Phono%20Panel%20Socket%20-%20White
Green:
http://store.daleproaudio.com/Items/neut-nys3675?&caSKU=neut-nys3675&caTitle=Neutrik%20NYS367-5%20Jack%20RCA%20-%20Panel%20-%20Gold%20-%20Green

Vectorman0
07-31-2009, 12:17 PM
Are those the ones that jrok sells?

xILLYRIAx
08-03-2009, 08:30 PM
Monoprice offers the "keystone" variety of RCA jacks. They're really just gold plated couplers
http://www.monoprice.com/products/search.asp?spcDB=10426&spcWord=Audio%2FVideo+Keystone+Jack&keyword=rca%20connector

adding 1 each of those comes to a total of $5.66 shipped

here's the S-video variety
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10426&cs_id=1042602&p_id=2993&seq=1&format=2

Bay78
08-05-2009, 03:32 PM
Thats good to know. My next project is going to be a SuperGun. Those are nice pics.

shadowkn55
08-07-2009, 02:14 PM
Any ideas on where to get the key slot for the jamma edge connectors? I bought some from yaton and it didn't have one.

Xian Xi
08-07-2009, 02:18 PM
You dont need one. But if you want one:

http://www.jammaboards.com/store/polarizing-key-fits-3-96mm-edge-connectors-/prod_133.html

GSL
08-11-2009, 03:20 PM
Getting to the final stages of putting my supergun together, and I'm starting to think about what to do for a controller. I've got a modded DC Agetek stick that I'd like to just wire with a NeoGeo pinout and turn into a multi-console stick, but I'm having a bit of an issue with the proper cables. I got some proper DB15 connectors and hoods with my last Mouser order, but I don't know where to find a decent 15-wire cable. I've tried tearing apart both an old VGA cable and an old gameport-style PC gamepad, thinking since both of their connectors were 15-pin that there'd be 15 wires inside the cables, but there were only 8 or 9. I've got an old 25-pin printer cable that I can sacrifice, but that seems like a pretty ghetto solution to me. Has anyone found a decent and cheap place to get either a ~6-foot 15-wire cable, or one already wired to a DB15 female connector?

xiao_haozi
08-11-2009, 03:29 PM
Getting to the final stages of putting my supergun together, and I'm starting to think about what to do for a controller. I've got a modded DC Agetek stick that I'd like to just wire with a NeoGeo pinout and turn into a multi-console stick, but I'm having a bit of an issue with the proper cables. I got some proper DB15 connectors and hoods with my last Mouser order, but I don't know where to find a decent 15-wire cable. I've tried tearing apart both an old VGA cable and an old gameport-style PC gamepad, thinking since both of their connectors were 15-pin that there'd be 15 wires inside the cables, but there were only 8 or 9. I've got an old 25-pin printer cable that I can sacrifice, but that seems like a pretty ghetto solution to me. Has anyone found a decent and cheap place to get either a ~6-foot 15-wire cable, or one already wired to a DB15 female connector?

http://www.jamma-nation-x.com/jammax/store.html

Home Consoles -> Accessories ... first item listed there.

GSL
08-11-2009, 04:39 PM
Thanks! I was hoping for something a bit cheaper, like just some generic DB15 PC cables or something, but I'm far enough into the project that I don't really want to be too picky. Besides, I can't argue with free shipping, and this is a good way to support Jamma Nation X (their supergun wiring diagram has been invaluable).

Xian Xi
08-11-2009, 06:39 PM
If you already have neo extensions it would be best to just add a male DB15 connector to the back of the DC controller and mod it that way. You can then retain the DC cord and plug into the DB15 for supergun use.

GSL
09-05-2009, 04:54 PM
Thanks for the advice. I now have a nice Sanwa modded Agetec stick that works on the Dreamcast as it always did, and has a DB15 port for plugging into the supergun or adapters for other consoles (coming soon) via the excellent Neo extension cable I got from JNX.

A few more parts questions: I'm thinking of modding my US Tekken V Hori stick with Sanwa or Seimitsu parts,and wondered where a good place is to find those .110 quick disconnects. I just soldered the wires to the terminals on my Agetec stick, which is all well and good until I need to change something. And what's the optimal wire gauge to use for those?

Also, where would I find short plastic risers and accompanying screws? I want to place a sheet or two of acrylic over the exposed parts on my MV1F for looks and to keep the cat from rubbing his face on it, make a semi-enclosed case. I've seen some CMVS' with a similar design in someone's sig here once; I can't find any pictures right now but that was the definite inspiration.

xiao_haozi
09-05-2009, 05:12 PM
A few more parts questions: I'm thinking of modding my US Tekken V Hori stick with Sanwa or Seimitsu parts,and wondered where a good place is to find those .110 quick disconnects. I just soldered the wires to the terminals on my Agetec stick, which is all well and good until I need to change something. And what's the optimal wire gauge to use for those?

Also, where would I find short plastic risers and accompanying screws? I want to place a sheet or two of acrylic over the exposed parts on my MV1F for looks and to keep the cat from rubbing his face on it, make a semi-enclosed case. I've seen some CMVS' with a similar design in someone's sig here once; I can't find any pictures right now but that was the definite inspiration.

Both of these you should be able to grab at your local hardware store. The disconnects you MIGHT have to grab at a place like radio shack, but I usually get them at the small mom-n-pop hardware shop near my house. Risers and screws you should absolutely be able to get at your hardware store. Mine has a nice selection of plastic, brass, or steel which is nice to give a variety depending on the project.

GSL
09-05-2009, 09:07 PM
We've got a pretty small Ace Hardware around here and that's it, though there's a Home Depot up the road about 15 miles that ought to be big enough for that sort of thing. Ace and a few other small hardware places in town have quick disconnects, but they only go down to I think .118 (or whatever the size is that fits Happ-style buttons). I haven't seen much in the way of risers at the local places, and their selection of screws gets pretty sparse down in the smaller sizes.

The local Radioshack ("The Shack") is pretty pathetic, though--they do sell quick disconnects, but the only size again is for the American buttons.

P00t
09-10-2009, 08:27 PM
Got some of these pots today...

http://img-europe.electrocomponents.com/largeimages/RF166388-01.jpg

Looking for some nice knobs to put on them.

Anyone know the right page at DigiKey for the pot knobs? I take it those are split shafts, so what kind of pot knob will I be looking for exactly, I see grub screw ones and some shafted ones.

TIA

Xian Xi
09-10-2009, 08:43 PM
You need to find out the diameter of the shaft. Knobs I think are on the first page in the thread.

P00t
09-10-2009, 08:52 PM
You need to find out the diameter of the shaft. Knobs I think are on the first page in the thread.

Its 6mm dude.

There's a few types, I don't think some will fit properly, plus I'm looking to shop with Digikey not Mouser, parts are abit cheaper at digikey even after getting raped with customs fee's.

famitek
09-16-2009, 11:36 PM
My AES is missing case screws. Are there replacement screws out there that I can get without having to rethread the holes?

FA-MAS
10-03-2009, 11:04 AM
I'm building a supergun similar to the OP's and I'd like to add RGB level controls. What POTs do you guys use for yours?

xiao_haozi
10-03-2009, 11:09 AM
I'm building a supergun similar to the OP's and I'd like to add RGB level controls. What POTs do you guys use for yours?

For pots I use:
http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&productId=255485&catalogId=10001&freeText=255485&app.products.maxperpage=15&storeId=10001&search_type=jamecoall&ddkey=http:StoreCatalogDrillDownView

For knobs I use:
http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&productId=265051&catalogId=10001&freeText=265051&app.products.maxperpage=15&storeId=10001&search_type=jamecoall&ddkey=http:StoreCatalogDrillDownView
or this style
http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&productId=265181&catalogId=10001&freeText=265181&app.products.maxperpage=15&storeId=10001&search_type=jamecoall&ddkey=http:StoreCatalogDrillDownView

FA-MAS
10-08-2009, 11:09 AM
Anyone have another source for the S-Video panel mounts with solder cups? RAM Electronics is backordered. I can't seem to find them elsewhere without a minimum order.

xiao_haozi
10-08-2009, 11:12 AM
Anyone have another source for the S-Video panel mounts with solder cups? RAM Electronics is backordered. I can't seem to find them elsewhere without a minimum order.

Do you need/want gold or not?

FA-MAS
10-08-2009, 11:21 AM
Yeah, i'd prefer gold. I've already got all the other rca jacks in gold.

xiao_haozi
10-08-2009, 12:51 PM
Yeah, i'd prefer gold. I've already got all the other rca jacks in gold.

Yeah RAM is the only place I know of atm that still carries them....
I woudl either call them and ask how long they expect to be backordered or you could try emailing Jeff Kurtz or Jrok and seeing if they would hook you up.

FA-MAS
10-08-2009, 02:21 PM
Yeah, the email said they'd be back in stock on the 28th. I'll try emailing jrok and Jeff

FA-MAS
10-08-2009, 04:20 PM
Been searching all day, but I found them.

http://www.showmecables.com/viewItem.asp?idProduct=2567

Xian Xi
10-08-2009, 07:35 PM
Great searching dude.

mohsin
10-09-2009, 11:24 AM
I was facing the same problem. I tried a lot but was unable to fix the problem. Thanks to your efforts, by reading your posts i am able to handle the problem i was facing. I really appreciate your efforts. thank you.

Venom249
10-10-2009, 08:12 PM
Saw this thread full of great info hoping for help with audio!

Recently became the proud owner of a dedicated 4 slot MVS, i have what i believe to be 2 separate sound issues. left channel has constant medium level static (performs perfectly in the hardware test however) and the right channel performs perfectly until after about 30+ minutes of playing, at that point it produces a static/garbled noise in place of other sound effects. I did replace audio caps on this system, prior to the cap kit the problem with the right channel was immediate just as the left channel is, now it simply takes longer for the problem to arise.

Also if i place a fan in the back it takes even longer for the right channel problem, but does not affect the left channel's constant static. Speaker is not problem in left channel as switching wire causes same effect on other speaker, also already tested wire to Jamma harness.Maybe this is some type of over heating but what? please send me your suggestions i can't take the bitter sweet 45 min increments of SVC Chaos any longer

xiao_haozi
10-10-2009, 08:21 PM
Saw this thread full of great info hoping for help with audio!

Recently became the proud owner of a dedicated 4 slot MVS, i have what i believe to be 2 separate sound issues. left channel has constant medium level static (performs perfectly in the hardware test however) and the right channel performs perfectly until after about 30+ minutes of playing, at that point it produces a static/garbled noise in place of other sound effects. I did replace audio caps on this system, prior to the cap kit the problem with the right channel was immediate just as the left channel is, now it simply takes longer for the problem to arise.

Also if i place a fan in the back it takes even longer for the right channel problem, but does not affect the left channel's constant static. Speaker is not problem in left channel as switching wire causes same effect on other speaker, also already tested wire to Jamma harness.Maybe this is some type of over heating but what? please send me your suggestions i can't take the bitter sweet 45 min increments of SVC Chaos any longer

Wrong thread. Try using the search function and checking for MVS sound issues.

buaku
10-20-2009, 01:00 AM
Now that I'm looking for boxes again...any idea what kind of box that is in the first picture, or where to find one?

It looks like a pretty decent size for me.

FA-MAS
10-20-2009, 01:03 AM
I got my case from Pactec Enclosures. http://www.pactecenclosures.com/

Take a look at their Desktop Enclosures. I went for the DM-4, it's more than enough for an Arcade PSU and everything u need for a Supergun.

buaku
10-21-2009, 12:30 AM
Thanks! They got some good looking stuff for some other ideas I had too.
Some of the CL series were jumping out at me too, but it looks like a DM-2 might fit my needs pretty well.

I also was thinking about doing a box to hold an arcade psu and an isolation transformer too :P
It's like a portable power supply!

Xian Xi
10-21-2009, 12:36 AM
Pactec is ok but just remember that their measurements are about 1/4" less than what they say it is.

buaku
10-21-2009, 12:44 AM
That's good to know. This time around I want something bigger than what I really need, in case I ever want to cram more crap in there. Plus it gives me more wiggle room :)

I don't think I'll ever be totally satisfied...always something to improve.

Xian Xi
12-08-2009, 01:23 PM
I'm out of gold s-video jacks, anyone got a source? Not looking to spend more than ~$3 each hopefully.

RGB32e
12-09-2009, 05:19 PM
Does anyone purchased replacement volume sliders for the MVS MV-1?

Also, has anyone replaced the volume slider for the headphone jack to provide a fixed output over the headphone output? I have to fiddle and poke my slider control to get the right level of sound from the heaphone jack in both channels. Any suggestions would be appreciated.

FA-MAS
02-17-2010, 02:35 AM
Anyone know where I can get some good quality (AKA not Radio Shack) Wire Mount RCA Male Plugs (Red White, and Yellow) as well as a matching Wire Mount SVideo Male Plug so I can make some custom cables for my Supergun?

And if possible, a 8 pin Din 262 Degree Housing Plug that has a jacket that matches the color of those RCA Plugs.

They don't have to be gold plated either.

xiao_haozi
02-17-2010, 09:20 AM
Anyone know where I can get some good quality (AKA not Radio Shack) Wire Mount RCA Male Plugs (Red White, and Yellow) as well as a matching Wire Mount SVideo Male Plug so I can make some custom cables for my Supergun?

And if possible, a 8 pin Din 262 Degree Housing Plug that has a jacket that matches the color of those RCA Plugs.

They don't have to be gold plated either.

Jameco, digikey, partsexpress all carry those.

FA-MAS
02-17-2010, 11:07 AM
Not in any consistency. I can find the 8 pin Din, but can't find S Video. or I can find Svideo but not the RCA to match type of thing. I think I'm just gonna buy a cheap Wii cable that has all the connectors and hack it. It'll be better that way.


Jameco, digikey, partsexpress all carry those.

xiao_haozi
02-17-2010, 11:10 AM
Not in any consistency. I can find the 8 pin Din, but can't find S Video. or I can find Svideo but not the RCA to match type of thing. I think I'm just gonna buy a cheap Wii cable that has all the connectors and hack it. It'll be better that way.

Parts express should have them all (not sure about the 8pin din though). And digikey as well.... I just ordered sets of phono jacks and such for building a component switcher a few months back and got all my stuff from parts express. It's best to just grab their PDF version of the catalog and search that as both sites have search functions that are lame ducks in my opinion.

Logicdustbin
02-19-2010, 10:08 AM
LM1881

any where I can buy these, some where that takes paypal?

Xian Xi
02-19-2010, 12:36 PM
Jameco sells them. I dont think they take paypal. How many did you need?

P00t
02-19-2010, 01:02 PM
LM1881

any where I can buy these, some where that takes paypal?

Ebay is your best bet...

http://shop.ebay.co.uk/?_from=R40&_trksid=p1902.m38.l1313&_nkw=LM1881&_sacat=See-All-Categories

FA-MAS
02-19-2010, 01:19 PM
I got mine from Jameco, like others have said, I don't think they take paypal though.

Logicdustbin
02-19-2010, 02:11 PM
Ebay is your best bet...

http://shop.ebay.co.uk/?_from=R40&_trksid=p1902.m38.l1313&_nkw=LM1881&_sacat=See-All-Categories


saw some on ebay, $5 each plus $6 shipping was the cheapest.

I originally found this site:

http://www.futureelectronics.com/en/Technologies/Product.aspx?ProductID=LM1881NNOPBNATIONAL5096078

great prices, even better shipping costs, but after jumping through all the check out steps; no paypal.



/someday I should get a credit card (if my wife lets me :P )

Logicdustbin
02-19-2010, 02:12 PM
Jameco sells them. I dont think they take paypal. How many did you need?


I've just been wanting to play with them for a while now, I was buying other stuff, figured I would grab some to try out.

don't necessarily have a project in mind, just looking to keep the soldering iron warm :D

Logicdustbin
02-20-2010, 08:06 AM
also found this site:

https://avnetexpress.avnet.com/store/em/EMController?langId=-1&storeId=500201&catalogId=500201&term=lm1881&x=27&y=10&N=0&action=products

great prices, but, besides not offing paypal, the shipping was ridiculous for shipping to me at least.

I loaded up the 'cart' with a bunch of Lm380's and lm1881's, and the shipping was $38!?

they only offered 'overnight', I don't know if that is just for Canada. (you can use your own shipping account, but I don't have something like that)

Vectorman0
03-07-2010, 02:27 AM
I'm out of gold s-video jacks, anyone got a source? Not looking to spend more than ~$3 each hopefully.

I don't know if you are still looking, but the one RAM used to stock was Calrad Electronics part no 72-313G. I couldn't turn up any places that stocked it in a quick search.

Vectorman0
04-16-2010, 09:50 AM
Does anyone know of a nice, high quality panel mount VGA port? It's one of the the last parts I need for my new supergun project.

If anyone knows of a good, small size, stereo/dual 10K Pot, I would welcome suggestions. I already have one of these, I would just like to find one that isn't over an inch in diameter at the base.

shadows
05-04-2010, 09:10 PM
Anyone know where I can get these cylindrical standoff screws?
http://img6.imageshack.us/img6/9599/chipcmvs3.jpg

shadows
05-04-2010, 10:30 PM
Found them on mouser, so nm. :)

None in stock, back to square one...

shadows
05-08-2010, 03:47 PM
Found them on mouser again, no male female standoff though so gonna have to use an 1.5 inch screw, but good enough.

P00t
05-25-2010, 08:45 PM
Found them on mouser again, no male female standoff though so gonna have to use an 1.5 inch screw, but good enough.

Those are Neutrik Panel Phono Sockets, best available if you ask me, REAN also manufacture them at the same quality, maybe REAN is another sideline of Neutrik.

Farnell sell them:
RED: 5008529
GREEN: 5008542
BLUE: 5008554
YELLOW: 5008530
WHITE: 5008566

shadows
05-25-2010, 09:04 PM
Yea found the same ones on mouser, but I was after the "feet" for the board.
Ended up getting these, since I couldnt find the female version that was in stock.

728-FC1686-632-A
728-FC1688-632-A

And some long screws to tie both boards together.

xiao_haozi
05-27-2010, 11:56 PM
Anyone have any good sources for panel mount toslink connectors?
I did find this one:
http://www.sweetwater.com/store/detail/EHTL2

But couldn't really locate anything else to compare.

shadows
06-13-2010, 07:59 PM
Anyone knows where to get gold plated s-video and rca/phono jacks? Preferably in Canada but doesn't really matter.
Mouser is out with a lead time of 12 weeks. :S And they don't have gold plated s-video/mini dins there anyway, afaik.

AnonTwentyseven
07-21-2010, 11:28 PM
I'm looking for an on/off switch with a 4-pin Molex connector so I can turn on a Suzo Happ Power Pro power supply (80-0072-00 (http://www.happcontrols.com/powersupplies/80007200.htm)). The Molex connector is not like the standard one you would find on a harddrive connector in a PC. It has a pointed end on the left side of the connector housing, like this:

< o o o o |

I also found a drawing of one (if you remove the ears), although I don't know if it's the same size: http://www.molex.com/pdm_docs/sd/003091041_sd.pdf

I've been having a lot of trouble trying to find this piece.

FA-MAS
07-21-2010, 11:43 PM
Here it is at Digi-Key. You can use the one with the ears, it's just so it'll snap into a panel cause it's panel mount, you could try finding a wire mount if you don't like the ears, but it'll work with and i wouldn't worry about it.

http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=0003091041&x=19&y=16

It.s .093 so it's male and female pins are the same size as a regular 4 pin Molex connector.

Here's the mating part if you need it:
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=WM1326-ND

Also don't forget to order the pins that you need.

Male pins:
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=WM1102-ND


Female pins:
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=WM1103-ND

Edit: ugh, part you need is out of stock everywhere i look. I'd just replace it with a regular molex connector. Just use a jewlers screwdriver and push in the little arms on the pins so you can pull the pins out of your connector, then put it in a standard one

AnonTwentyseven
07-22-2010, 07:18 PM
Thanks for investigating that for me, but I'm hoping to find a switch I can buy that's already connected to one of those 4-pin connectors so I can just plug in and go. I'm an electronics noob and I don't have any equipment, so I'm really trying to avoid anything I need to piece together or solder if I can help it.

FA-MAS
07-22-2010, 08:47 PM
I dunno of where to buy a premade cable. So I'm guessing there are more than 2 wires going into that connector that we don't know what they do, otherwise it's super easy just to cut them and put on a switch?

Supasaru
07-22-2010, 09:14 PM
great prices, even better shipping costs, but after jumping through all the check out steps; no paypal.

/someday I should get a credit card (if my wife lets me :P )

Paypal used to offer some sort of protection thingie where it would give you a one-time-use credit card number.

I can't seem to find that service on the site anymore.....

lions3
11-02-2010, 09:39 AM
Looking for a good power supply for consolizing a MV1C. I found the one linked below on another forum post. Just wanted to see if there was a better/cheaper one I should be looking at. Also if anyone can help me find a panel mount link it would be appreciated too.

http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&productId=377845&

SIDE NOTE: What's the deal with Jameco and Mouser? I swear everytime I search their sites I can never find what I need. Does their search engine suck or do I just not know the proper terms?

shadows
11-02-2010, 12:55 PM
Ebay is your friend if you want a cheaper psu.
http://shop.ebay.com/i.html?LH_PrefLoc=3&_trkparms=65%253A12%257C66%253A2%257C39%253A1%257C 72%253A4030&rt=nc&_nkw=5v%203a&_trksid=p3286.c0.m14.l1513&_pgn=2

DC Power Connectors
http://ca.mouser.com/Interconnects/DC-Power-Connectors/_/N-womu?Keyword=dc+power+connector&FS=True

One of the most connector, has a nice look to it.
http://ca.mouser.com/Search/ProductDetail.aspx?R=163-R123B-Evirtualkey11180000virtualkey163-R123B-E

rtdzign
11-05-2010, 02:33 AM
Hey Everybody. I am in the process of researching on consolizing an MVS and am for now rummaging through forums and post and what not. So forgive if this post isn't adding anything, I am just wanting to make sure that my account doesn't get wiped again.

FA-MAS
11-07-2010, 10:45 AM
Where could I find a female scart connector that I can panel mount as well as a cutting template? I'm also looking for a male cable mount connector so I can make a cable too.

shadows
01-20-2011, 09:40 PM
Looking for these.
Steel truss screw [Full Thread] M4 12
Steel truss screw [Full Thread] M5 12

I misplaced one of the M5 for my marquee cover and I was missing a few M4 on my cab so I'd like to get a few but I cannot find anything in North America or it's an insane price or excessive minimum order.

Also looking for some convergence strips.

Xian Xi
02-27-2011, 02:20 PM
Looking for these.
Steel truss screw [Full Thread] M4 12
Steel truss screw [Full Thread] M5 12

I misplaced one of the M5 for my marquee cover and I was missing a few M4 on my cab so I'd like to get a few but I cannot find anything in North America or it's an insane price or excessive minimum order.

Also looking for some convergence strips.

Did you ever find these?

shadows
02-27-2011, 02:23 PM
Nope, found them on ratuken but shipping is way to much, tried through akihabarashop. But after a few emails back and forth, I think it wasnt worth it for them and havent heard back.

Xian Xi
02-27-2011, 02:25 PM
What do they look like?

shadows
02-27-2011, 02:26 PM
http://search.borderless.rakuten.com/borderless/search.action?st=&t=new&tl=0&k=truss+screws
Like a pan head but much wider.

distropia
03-16-2011, 11:20 AM
Do someone knows the konami connector used in The Simpsons / Mutant Ninja Turtles PCB?
Is a JST 15pin "NH connector" B15P-SHF-1AA, but I can't find it on Mouser or Jameco... Any other option?

I need it quickly. I've found it on the official JST site, but it's a japanese business and due to the terrible japanese situation, I would prefer some store with own stock in the US.

TNX!

Xian Xi
04-03-2011, 12:01 AM
Anyone know where they sell those 262 degree 8 pin din flange sockets?

shinjimimura
04-03-2011, 01:31 PM
Hello everybody, this is really a noob question so forgive me.

I'm about to consolize my first mvs (mv-1b) and I'm a bit concerned about the power supply: I still haven't fully understand what psu I should use. I see the choice is mainly between 3 groups of psu:

. regular atx psu: the ones used to power pcs boards. They're very large though, and seem an overkill for the power needs of mvs boards. So I'd discard them

. Internal psu.

. Table top.

I'd go with either an internal or a table top, but I want to be sure about what I need in order to install them: for the table top, I think beside the psu I also need a female connector to wire to the mvs for the psu to plug, am I right? Can you please point me to a pair (psu - connector)? And what about the internal psu? What other parts do I need to properly use it in the consolization?

And another part request: is there any store that sell the "deep" db15 female connectors needed to build a custom neo stick (AES use)? Cause the male port on the console is way too deep for a regular db-15.

Please forgive my clunky english

Xian Xi
04-03-2011, 03:02 PM
Hello everybody, this is really a noob question so forgive me.

I'm about to consolize my first mvs (mv-1b) and I'm a bit concerned about the power supply: I still haven't fully understand what psu I should use. I see the choice is mainly between 3 groups of psu:

. regular atx psu: the ones used to power pcs boards. They're very large though, and seem an overkill for the power needs of mvs boards. So I'd discard them

. Internal psu.

. Table top.

I'd go with either an internal or a table top, but I want to be sure about what I need in order to install them: for the table top, I think beside the psu I also need a female connector to wire to the mvs for the psu to plug, am I right? Can you please point me to a pair (psu - connector)? And what about the internal psu? What other parts do I need to properly use it in the consolization?

And another part request: is there any store that sell the "deep" db15 female connectors needed to build a custom neo stick (AES use)? Cause the male port on the console is way too deep for a regular db-15.

Please forgive my clunky english

For an MV1B you only need a PSU rated at +5v@3A. Depending on what size the tip is on the PSU is what you need to match for the power jack(inlet). The easier to find size is 2.1mm and 2.5mm barrel jack. If the PSU you buy doesn't have that size tip you can always replace it with a new tip matching.

And the deep DB15s are special made for SNK, you wont find them anywhere.

shinjimimura
04-04-2011, 03:25 AM
First of all: thanks for your help ;)

Now the questions.

So to use a table top psu the steps I have to follow are these, correct me if I'm wrong: 1. Find a +5v@3A psu. 2. See what kind of tip it has. 3. Buy a matching power jack (inlet). 4. Wire the power jack inlet to one of the +5v pins of the mvs. Is that right?

What about an internal (open frame) psu instead? Like this one for example: http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_88402_-1. Do I have to combine it with an entry module like this one (http://www.lizardlick.com/LL-Power-Entry-Module-3A_p_165.html)?

As a side note. I also have a 2 slot: what psu specs do I need to suit the power needs for both boards?

About the db-15: so the only way to build a custom neo stick is tearing apart an existing pad or an extension cable?

Again, thanks a lot :)

shinjimimura
04-08-2011, 01:11 AM
First of all: thanks for your help ;)

Now the questions.

So to use a table top psu the steps I have to follow are these, correct me if I'm wrong: 1. Find a +5v@3A psu. 2. See what kind of tip it has. 3. Buy a matching power jack (inlet). 4. Wire the power jack inlet to one of the +5v pins of the mvs. Is that right?

What about an internal (open frame) psu instead? Like this one for example: http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_88402_-1. Do I have to combine it with an entry module like this one (http://www.lizardlick.com/LL-Power-Entry-Module-3A_p_165.html)?

As a side note. I also have a 2 slot: what psu specs do I need to suit the power needs for both boards?

About the db-15: so the only way to build a custom neo stick is tearing apart an existing pad or an extension cable?

Again, thanks a lot :)
Maybe this is not the right thread for this kind of questions? Should I open up a new thread?

HMG
04-29-2011, 01:44 PM
Trying to gather parts for a Supergun. Are these all correct? Would these work in a plastic housing? Am I not going to blow anything up by using these?



SPST push button switch:

http://ca.mouser.com/ProductDetail/Apem/1413NC2/?qs=sGAEpiMZZMvxtGF7dlGNpsc96UrxsjXyPvH%2fPIrca28% 3d

SPST toggle switch:

http://ca.mouser.com/ProductDetail/Carling-Technologies/RA901-VB-B-1-V/?qs=sGAEpiMZZMtNT9UGfLL4eOd3cDQgL8vM0yQeJ4SK6r4%3d

DPST toggle switch (this could be used in Panel Mount right?):

http://ca.mouser.com/ProductDetail/CK-Components/S201031MS02Q/?qs=sGAEpiMZZMtn8lxF5bBjISlc5DhSwf1f

10k Resistor (this and the one below are the correct kinds right?):

http://ca.mouser.com/ProductDetail/KOA-Speer/MO1C103J/?qs=sGAEpiMZZMsPqMdJzcrNwtkiCP%2fuZm629FL9oBaXhno% 3d

1k Resistor:

http://ca.mouser.com/ProductDetail/KOA-Speer/MO1C102J/?qs=sGAEpiMZZMsPqMdJzcrNwtkiCP%2fuZm626KFTs2khzA0% 3d

S-Video Jack - Panel Mount (I don't mind silver, but is this the correct kind of jack?):

http://ca.mouser.com/ProductDetail/161-381-4-E/?qs=sGAEpiMZZMvlX3nhDDO4AOa6KZsDu0YzrPUbxXTWiq0%3d

RCA jacks Yellow Red White - Panel Mount:

http://ca.mouser.com/ProductDetail/Neutrik/NYS367-4/?qs=sGAEpiMZZMvlX3nhDDO4ANv5m%252bWbGXRyac%2fQqi8S fT0%3d

http://ca.mouser.com/Search/ProductDetail.aspx?qs=R5cXQUTKuHUWHl83AlgzLg%3d%3d

http://ca.mouser.com/ProductDetail/Neutrik/NYS367-2/?qs=sGAEpiMZZMvlX3nhDDO4ANv5m%252bWbGXRySuxNxOBkgW c%3d

DB-15 jacks - Panel Mount:

http://ca.mouser.com/ProductDetail/Tyco-Electronics-AMP/1658615-3/?qs=sGAEpiMZZMu857ZbtCGHtwLH3yEbFxhL0z8WNuAD38E%3d

mastamuzz
05-09-2011, 06:20 PM
looking to build some extension cords for AES given that JNX is out of stock!
I read this thread and nothing looks suitable for the job!
does anyone know where I can find the male and female connectors suitable for an extension cord!

also looking to build a pc2neo cable with the male input!

symbebekos
05-25-2011, 04:05 PM
Is there a source for a pre-drilled Lexan control panel tops? I just got an MVS-4-25c that came without one. I realize this isn't quite a tech question but this seemed like the right thread...

mmmonkey
06-21-2011, 09:58 AM
I'm after some flexible cabling to use for pads/sticks. I bought some 12 core cable which hasn't got a that big a diameter, but it's quite stiff and makes holding the pad I converted feel a bit off. Anybody know a good source for suitable cable? Pref UK based to save on postage costs, but will shop abroad if needed :-)

ta
Pete

Xian Xi
06-25-2011, 06:35 PM
I'm after some flexible cabling to use for pads/sticks. I bought some 12 core cable which hasn't got a that big a diameter, but it's quite stiff and makes holding the pad I converted feel a bit off. Anybody know a good source for suitable cable? Pref UK based to save on postage costs, but will shop abroad if needed :-)

ta
Pete

I usually use VGA cables and cut off the ends. The thinner cords are softer, the thick ones are just ugh.

MKL
06-27-2011, 12:34 PM
I'm after some flexible cabling to use for pads/sticks. I bought some 12 core cable which hasn't got a that big a diameter, but it's quite stiff and makes holding the pad I converted feel a bit off. Anybody know a good source for suitable cable? Pref UK based to save on postage costs, but will shop abroad if needed :-)


If you can order from Farnell (they require a VAT number in Italy):

http://uk.farnell.com/pro-power/850073-100m/cable-def-7-1-12a-12-core-100m/dp/711597?Ntt=711597

http://uk.farnell.com/pro-power/711615/cable-def-7-1-15a-15core-100m/dp/1190202?Ntt=1190202

mmmonkey
06-30-2011, 04:41 PM
Cheers chaps :)

racer445
07-11-2011, 06:10 PM
After a long, painstaking hunt, I managed to source down some edge convergence strips (permalloy strips). You can get them from Panasonic's part site, model# 0FMK014ZZ. http://www.pstc.panasonic.com/EpartR/PartsListChoice.asp These are really hard to find and I have no idea how many they have, so if you need em, get them quick.

Made in Canada so you know it's good!
http://dl.dropbox.com/u/1725586/arcades/stripps.jpg

rolins
08-16-2011, 08:22 PM
Where can I find aluminum box with vents?

Something like this - http://shop.vetcosurplus.com/catalog/product_info.php?products_id=9661

Xian Xi
08-18-2011, 03:22 AM
Where can I find aluminum box with vents?

Something like this - http://shop.vetcosurplus.com/catalog/product_info.php?products_id=9661

Hammond mfg should carry some. You can buy their parts on mouser.com but its better to view their products on their site.

BenTAxeL
10-18-2011, 10:10 PM
Probably the wrong spot but its a part and I dont know where to find one.

The Monitor chassis blew (yey what fun) Its a GE-728HR suits 26' 28' monitors.

Where do I look I googled it but came up short

goombakid
12-20-2011, 01:54 AM
In the process of gathering items for my CMVS, I'd thought I'd share some parts I've procured.

CMVS PSU:
http://www.mouser.com/Search/ProductDetail.aspx?R=CENB1020A0503F01virtualkey999 90000virtualkey675-CENB1020A0503F01 (it's the one that looks like a notebook battery, not the wall wart...I'm not fond of the wall wart. This does not come with the AC cable, but you can just use a standard PSU cable that comes with your computer or monitor)

2.5" DC Power connector:
http://www.mouser.com/Search/ProductDetail.aspx?R=PC712Avirtualkey50210000virtu alkey502-PC712A (matches above PSU)

I also get my RCA jacks from there (Neutrik is the manufacturer) for all colors.


Also, looking for US sources for 12 wire cable for future controller project.

WupWuh
12-26-2011, 02:35 PM
Does anyone know of any place that sells AMP UP connectors that are not white? Looking for yellow and blue specficially (12 pin) and have not had any luck.

Xian Xi
12-26-2011, 03:00 PM
Does anyone know of any place that sells AMP UP connectors that are not white? Looking for yellow and blue specficially (12 pin) and have not had any luck.

What pitch?

WupWuh
12-26-2011, 04:09 PM
What pitch?

Looking for Male and Female that can fit 22awg wire. 3 rows of 4 pinholes.

Basically this:
http://www.akihabarashop.jp/images/AMP12PFront.jpg

shadows
12-26-2011, 04:12 PM
Try http://www.tms-designs.com/theshed I got a yellow one from him.

WupWuh
12-26-2011, 04:32 PM
Thanks! I'll shoot him a message. Bought a 2 player harness from him a while back with that yellow connector, but I just had to go and get another cab and I'm trying to fix up the control panel.

Xian Xi
12-26-2011, 04:36 PM
Looking for Male and Female that can fit 22awg wire. 3 rows of 4 pinholes.

Basically this:
http://www.akihabarashop.jp/images/AMP12PFront.jpg

For furture knowledge, pitch is the distance between the pins tip to tip. When dealing with connectors you will need to know that if you can't find the part you need.

WupWuh
12-26-2011, 05:30 PM
Thank you very much for the info Xian Xi. I had only heard of pitch as a measurement of a roof's angle before. Knowledge obtained!

Xian Xi
12-26-2011, 05:32 PM
Thank you very much for the info Xian Xi. I had only heard of pitch as a measurement of a roof's angle before. Knowledge obtained!

Ya, with arcade stuff you'll hear it very often.

fabriciom
01-21-2012, 04:54 PM
Can someone point me to where I can find a vertical connector for JAMMA? or maybe the slimmest connector? I have found a perfect box for my MV1-FZ but the connector I bought (http://www.arcadebits.com.au/wiring/15-jamma-harness-with-quick-connects.html) takes up too much space. Any help welcomed.
This one http://www.ebay.ie/itm/Video-Game-Parts-JAMMA-Edge-Conector-56-Pin-0-156-/170446181436 seems thiner and maybe I can bend the pins up and down to make more room.

supergoose
01-21-2012, 05:21 PM
This one http://www.ebay.ie/itm/Video-Game-Parts-JAMMA-Edge-Conector-56-Pin-0-156-/170446181436 seems thiner and maybe I can bend the pins up and down to make more room.
i'd do the same. you won't find a thinner jamma edge connector anywhere on the net.

blueskies758
06-09-2012, 07:02 PM
Man arcadeshocks prices are insane. Looks like I'll be building my own supergun and arcade sticks since my father and I have basic carpentry skills

Xian Xi
06-09-2012, 07:40 PM
Man arcadeshocks prices are insane. Looks like I'll be building my own supergun and arcade sticks since my father and I have basic carpentry skills

What parts are you looking for?

distropia
07-17-2012, 01:44 PM
Someone selling pre-programmed SNK1A (and B if possible) chips for the MVS 1AX? These are common PALCE chips, but I have to repair a customer's board and no luck finding the jedec files on the internet.

grips03
07-27-2012, 08:00 AM
I'm looking for gold s-video panel mount connector that would match Neutrik NYS367 RCA/phono connector? Anyone have a current supplier?

http://www.mouser.com/ProductDetail/Neutrik/NYS367-2/?qs=R5cXQUTKuHXTYYXNEuZgERK0scA30Fi7yx15ViBiOck%3d

Finerion
08-03-2012, 08:02 AM
Does anyone have a good source for suitable replacements of the CXK5864BSP-12L color palette RAM for a MV-1? I got a used cab recently with some issues with one of these chips. Someone attempted to make a repair by replacing one of these with a socket and a used MB8464A-10L-SK but that chip has bad leg damage. I'd rather find a straight replacement for the CXK5864BSP-12L so that both of them match, but anything equivalent would be fine.

Thanks!

Xian Xi
08-03-2012, 08:08 AM
That's 8k x 8, that should be Video RAM if I'm not mistaken. You can use any 28 pin SOIC 8k x 8 (64kb) static RAM. Just make sure you match the speeds.

shadows
08-03-2012, 11:09 AM
http://www.twistywristarcade.com
http://www.buyicnow.com/ Mostly used parts, but great seller.

And there's still ebay where you can get good deals for NOS chips. But you might have to be patient to get that good deal.

fremen
08-03-2012, 11:59 AM
Hi compadre,


Someone selling pre-programmed SNK1A (and B if possible) chips for the MVS 1AX? These are common PALCE chips, but I have to repair a customer's board and no luck finding the jedec files on the internet.

Here are 2934

Un saludo

distropia
08-03-2012, 01:44 PM
Hi compadre,

Here are 2934

Un saludo

Gracias chavalote! Otra MVS que vuelve a la vida.

violentsnake
08-06-2012, 10:50 PM
I need to replace the cord for my arcade cabinet. On the machine it says:

VOLTS: 115 V.A.C. 60 Hz
AMPS: 5 MAX, 2 NORMAL

It looked like a regular computer cord, but any of those I have read 10A125V so I assume they might not be safe to use and haven't tried. I've searched for the cord but I know very little about these arcade cabs (I basically know how to change the carts and put quarters in lol) so if you know where I can buy the proper cord cheap please let me know.

shadows
08-06-2012, 10:54 PM
It will be fine with a 10amp 125v power cord.

butteroj
08-19-2012, 11:35 AM
I recently picked up a PGM and want to consolize it but cannot for the life of me find a suitable desktop psu. Any ideas?

distropia
08-20-2012, 03:22 PM
I recently picked up a PGM and want to consolize it but cannot for the life of me find a suitable desktop psu. Any ideas?

Desktop dual voltage are becoming harder to find. Last time I made a project like yours, I bought a meanwell open PSU and a aluminium project box. Reliable, cheap and easy to find replacement, but more work for you.

butteroj
08-21-2012, 07:41 AM
Desktop dual voltage are becoming harder to find. Last time I made a project like yours, I bought a meanwell open PSU and a aluminium project box. Reliable, cheap and easy to find replacement, but more work for you.

I dont know why I didnt think of that! This should work, no? http://www.meanwell.com/search/pt-45/default.htm

Yodd
08-21-2012, 08:44 AM
I dont know why I didnt think of that! This should work, no? http://www.meanwell.com/search/pt-45/default.htm

While one of those would work for the PGM, Jameco does sell a nice little dual output tabletop PSU for about $25.

http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?freeText=AEH45UM23+&langId=-1&storeId=10001&productId=2138880&search_type=jamecoall&catalogId=10001&ddkey=http:StoreCatalogDrillDownView

Since you don't need the -5v for PGM, a suitable dual output would be a better choice IMO. Plus it has quite a bit more amperage on the 5v rail.

fremen
09-15-2012, 05:20 AM
Hi,

I need one or two mvs PROG8M42 boards, anybody has??

Thank you very much in advance

Saludos

shadows
10-25-2012, 01:53 AM
Looking for 2-3 Scart female panel mount sockets.Anyone knows a source in NA that has them? Ive seen them on mouser before but I cant find them anymore.

shadows
10-26-2012, 11:38 PM
Found them on mouser but I'd prefer vertical pins over right angle pins. Anyone?
http://ca.mouser.com/Search/Refine.aspx?Keyword=K-SCARTX

Fayk
11-27-2012, 01:54 PM
Anyone know the right parts (mouser or otherwise) for the little fan header (+pins) like on the fan on the CPS2 A-board? Was going to replace the fan, but just have bare wires. I thought doing the header properly would be really nice compared to just cutting and splicing the wires (even if that works just fine).

shadows
11-30-2012, 01:21 AM
Ive used those before https://secure.dipmicro.com/store/HDR-PIN-F
Not on fans used in CPS2 specifically, but the connector from I remember is a least very similar . So double check first.

Xian Xi
11-30-2012, 02:53 AM
I think the stock ones are JST but you can use pretty much any 2.54mm(0.1") spacing header.

lopezoa69
01-12-2013, 05:53 PM
I need help in locating pots for the neck board of a Wells Gardner K7000 25 inches. These pots are made of ceramic I believe and simply cracked and had to removed them from the neck board. I tried to replace the pots with some generic ones I found but no dice (yes, horrible hack job!). I believe they are 2K but I am not sure. I am including some pictures (the two pots are the farthest on the right side and believe they are for blue gain and blue cutoff respectively) so that you guys can point me to where to buy them online. I wouldn't mind buying the neck board if I can find one in good shape. Thanks to all for your help!
https://www.dropbox.com/s/80frubmr2ejdrz1/IMG_2005.JPG
https://www.dropbox.com/s/oj1l6nj05hp1ofx/IMG_2009.JPG
https://www.dropbox.com/s/26692zotdtf5iug/IMG_2017.JPG
https://www.dropbox.com/s/vtwm7tdcfug19ig/IMG_2018.JPG
https://www.dropbox.com/s/5a5athg7y3061w7/IMG_2019.JPG

lopezoa69
01-12-2013, 05:54 PM
I posted the images on my dropbox, so right click on each "?" box to open image in a new window or tab. Thanks again!
1!

GohanX
01-29-2013, 11:19 PM
Does anyone have a source for a panel mount s-video jack that uses something around a 1/2" hole? I accidentally drilled the hole a little too big, so now the one I have won't work unless I use a washer to hold it in place. I could find a panel mount coupler (http://www.ramelectronics.net/product.aspx?zpid=767), but it would be a bit more of a pain that soldering directly to the jack.

shadowkn55
01-29-2013, 11:36 PM
Does anyone have a source for a panel mount s-video jack that uses something around a 1/2" hole? I accidentally drilled the hole a little too big, so now the one I have won't work unless I use a washer to hold it in place. I could find a panel mount coupler (http://www.ramelectronics.net/product.aspx?zpid=767), but it would be a bit more of a pain that soldering directly to the jack.

http://www.digikey.com/product-detail/en/MD-40CV/CP-2840-ND/352861

GohanX
01-29-2013, 11:52 PM
That looks perfect, thanks!

daskrabs
05-21-2013, 11:13 AM
Replacement Volume Pot for MV-1B?
I guess I'm looking for a vertical trimpot. Anyone know the ohm value? Sorry for the double post.

Vectorman0
09-08-2013, 09:37 PM
I'm looking for recommendations for the following:

-Standoffs for mounting a multi slot MVS board to a plexiglass base, and accompanying screws. Rubber washers would be cool to, to put between the screw and powder coated cover.
-High quality threaded rocker switch for a consolized neo (I haven't had good experiences with snap-in switches in the past)
-A bunch more odds and ends I can't think of at the moment

Xian Xi
09-08-2013, 10:23 PM
I'm looking for recommendations for the following:

-Standoffs for mounting a multi slot MVS board to a plexiglass base, and accompanying screws. Rubber washers would be cool to, to put between the screw and powder coated cover.
-High quality threaded rocker switch for a consolized neo (I haven't had good experiences with snap-in switches in the past)
-A bunch more odds and ends I can't think of at the moment

I have all those except rubber washers.

Vectorman0
09-12-2013, 01:16 PM
I'm going to be placing an order with mouser in the next week or so, so I think I'm just going to get some stuff from there. They have a wide selection of standoffs. I haven't looked into switches yet.

Does anyone know what thread size stock MVS boards came with for their PCB feet? I think I want to go with that size since it's what they were designed for. Also, I think I will go with 3/8" height standoffs unless someone thinks another size would be better.


James, what model(s) rocker switch do you use?

Xian Xi
09-12-2013, 02:15 PM
I just use a SPST round snap in rocker for my stuff. Not sure of the model number but it's a Cherry brand switch.

rolins
10-07-2013, 04:22 PM
Anyone have or know where I can get an OKI M6295?
I need at least 2 of them, thanks.

toofastforyahuh
11-13-2013, 02:09 PM
I have 2 parts supply questions.

1. Does anyone know where to get a MVS-to-JAMMA inline adapter analagous to this one:
http://www.jammaboards.com/store/neogeo-mvs-to-jamma-inline-adapter-mvs2jamma.html
? I would like 2 of them.
Not only has this company been out of stock for months, but they never reply to my emails. (and yes I check spam)
What's worse, other parts they carry are going out of stock like mad. Either they wait to order in bulk, or it's Christmas rush, or... they're going under.

2. What are the RGB video connectors on modern JAMMA harnesses called and where can you source male adapters?
Such as on this one:
http://www.jammaboards.com/store/jamma-full-cabinet-wiring-harness-loom-jamma-h1.html?selected_section=faq
My Wells Gardner has a 10-pin KK type connector, and I'd like to make an adapter (rather than ripping my new harness apart) just in case I ever replace my monitor with one that has this connector.

Thanks!

EDIT:
Apparently this is a "TJC2" connector. Unfortunately the only source I see has male PCB connectors and female cable connectors (not cable-to-cable) and has a minimum order of 100K units.
http://www.alibaba.com/product-gs/335999780/TJC7_5_5_5mm_pitch_Connector.html

So is this REALLY a common arcade monitor connector? I've seen at least 3 JAMMA harnesses online that have this. Hate to desecrate a nicely made harness but looks like it's much easier to cut it off and crimp my own KK connector instead.

GohanX
12-31-2013, 09:52 AM
Does anyone know where I could get something to cover the jamma connector like this:

http://www.blogdosanro.com/wp-content/uploads/2010/05/newAW_A-550x412.jpg

xsq
01-01-2014, 07:39 AM
hm, I read somewhere that people often use the "clips" from plastic (slide) binders... hope you know what I mean.

http://www.jfkbinding.co.uk/asps/uploads/big/573-1.jpg

420p
01-01-2014, 07:50 AM
I somewhere read, that the plastic cover for the connection from genesis to mega cd fits perfectly.
http://www.gametrog.com/GAMETROG/HOW_to_connect_Hook_Up_SEGA_32X,_SEGA_Genesis_Mode l_1,_SEGA_CD_2_a_files/SEGA%20Genesis%20expansion%20port.jpg

shadows
01-01-2014, 08:28 AM
I somewhere read, that the plastic cover for the connection from genesis to mega cd fits perfectly.
http://www.gametrog.com/GAMETROG/HOW_to_connect_Hook_Up_SEGA_32X,_SEGA_Genesis_Mode l_1,_SEGA_CD_2_a_files/SEGA%20Genesis%20expansion%20port.jpg

Not on a 56pin/JAMMA edge.

420p
01-01-2014, 08:57 AM
Not on a 56pin/JAMMA edge.

That's what you get for trusting zeee internetz.

GohanX
01-02-2014, 08:19 PM
hm, I read somewhere that people often use the "clips" from plastic (slide) binders... hope you know what I mean.

http://www.jfkbinding.co.uk/asps/uploads/big/573-1.jpg

That's a fantastic idea.

Xian Xi
01-02-2014, 08:51 PM
That's what I've used. Locally they only sell them in multi color packs, which sucks.

GohanX
01-02-2014, 09:31 PM
Fine with me,I should be able to find a red one. Iirc OfficeMax sells then for a couple of bucks for a five pack.

GohanX
01-06-2014, 09:17 PM
Thanks again xsq, got some report covers from Office Depot and it is perfect when cut to size with a dremel.

goombakid
01-06-2014, 11:23 PM
That's what I've used. Locally they only sell them in multi color packs, which sucks.

I've used that on my CMVS. I actually got the idea from you, Sifu. I got some from a scrap crafting store for 10 cents.

xsq
01-08-2014, 10:30 AM
Thanks again xsq, got some report covers from Office Depot and it is perfect when cut to size with a dremel.
glad I could help, but I was just faster than the other guys ;) Looks aces man.

aha2940
01-21-2014, 04:57 PM
Hi

I am looking for an original AES BIOS to replace the UniBIOS on my AES board 3-6. Since I bought the Magic MVS converter, it's a PITA to have to press the button on the converter everytime for games to boot.

Thanks!

Xian Xi
01-21-2014, 05:11 PM
Hi

I am looking for an original AES BIOS to replace the UniBIOS on my AES board 3-6. Since I bought the Magic MVS converter, it's a PITA to have to press the button on the converter everytime for games to boot.

Thanks!

I have some, shoot me a PM.

aha2940
01-21-2014, 05:14 PM
I have some, shoot me a PM.

Thanks, Xian Xi, however for whatever reason, my account cannot create new threads, view profiles of anybody (including myself) nor send PMs. The shipping would be to the US or Colombia (whichever is cheaper). Also, if you can tell me who can I ask about my account's issues, it would be great :)

Thanks!

Xian Xi
01-21-2014, 07:19 PM
Thanks, Xian Xi, however for whatever reason, my account cannot create new threads, view profiles of anybody (including myself) nor send PMs. The shipping would be to the US or Colombia (whichever is cheaper). Also, if you can tell me who can I ask about my account's issues, it would be great :)

Thanks!

Contact me on my site: http://www.jamma-nation-x.com

SuperForte
01-26-2014, 11:11 AM
Need some help figuring out where to get some parts for a arcade stick conversion I am working on.

I am trying to find a good cheap arcade stick I can grab off amazon to modify with sanwa parts.

http://www.amazon.com/PS3-Fighting-Stick-V3-Playstation-3/dp/B0057WDBHA/ref=sr_1_4?ie=UTF8&qid=1390752391&sr=8-4&keywords=arcade+stick

as well as this are two ones I found that look interesting.

http://www.amazon.com/Qanba-Q1-PS3-Joystick-Fightstick/dp/B00BXPIO1S/ref=sr_1_7?ie=UTF8&qid=1390752391&sr=8-7&keywords=arcade+stick

Not sure which arcade stick to purchase though.

Also where is a good online site (not ebay) that sells good parts for modding? I really think all i need is a DB15 female port. A breakout board on it would be nice. The less soldering the better.

Any ideas at all?

fluxcore
01-26-2014, 11:35 PM
Still trying to find a suitable replacement spring for the original AES sticks, the thing is tiny. I know a lot of springs it is NOT, LS32, LS55, LS33, JLF, Ultrastik 360.

Evilpoptart
01-27-2014, 03:12 PM
Kinda related to parts for sourcing. I ran across an older video on Arcade Repair Tips for Replacing Cabinet Lights (http://www.youtube.com/watch?feature=player_detailpage&v=IZQI5nOHI5w#t=224) I have had mixed recommendations for the correct bulb for the cornlights/button lights.

From previous knowledge I have seen people recommend 194's or 161's for big red cabinets depending on what people can get there hands on to replace them with. The main difference between these two are the 194's run at 3.78 watts while the 161's run at 2.66 watts.

The 194's are roughly going to be about 40% brighter versus the 161's which might be too bright for your cabinet. Both of these bulbs you can buy all day long on the net however, if you need to find them locally your auto shop might carry them since they are also used for instrument cluster panel lighting for older cars.

I prefer the 161's but what ever is available works for some.

Hope this helps.

duo_r
02-09-2014, 04:05 PM
Just want to share an inexpensive ($1.24) s-video connector that takes just a little modding:

http://www.monoprice.com/Product/?c_id=104&cp_id=10426&cs_id=1042602&p_id=6557&seq=1&format=1#largeimage

http://images.monoprice.com/productlargeimages/65572.jpg

You basically need a dremel tool with the metal disc blade attachment. Just cut right above the last thread, go around carefully, and you will see the 4 solder contacts to use.

It comes with a nut that holds it place. Now you want a hole slightly smaller than 1/2", I didn't have the correct size so I used my dremel to get this to work just right because the front connector is just slightly bigger than the threads.

Installed pics, note I haven't soldered to the jack yet so that's why there are still colored wires in this pic

http://imagizer.imageshack.us/v2/640x480q90/850/xxas.jpg

http://imagizer.imageshack.us/v2/640x480q90/607/6s64.jpg

If you have never bought anything from Monoprice, killer deals on A/V cables (HDMI's) and their wall mounts are also legit. If you aren't already a customer sign up using this link and get $5 off your 1st order:

http://u21280.sendgrid.org/wf/click?upn=XIPNX9ZC-2FnVc7NHDPX4UZhTa-2BKq6R3dRrzwRLa2OJt4-3D_zPFujn5wQhj8OGpFP5Q1K0bjKujzBdZDWJqd7I-2BXhOY-2Fk9gdF35uqbXn3XjFpfF2flARuPNzrJmN9aKaWU9Z42VNCzn1 8VoLwgT4x-2B4uiQrdh9PCz5S-2FuM-2F9gLkn53wLcmWpky5msTunGZVOFjgBDBTX-2Fle38UDBi-2FQO1xYlijQZa0fs-2B12XHcZ0bHYc5pKZOesl7d2r5D-2FMXu2hIz-2BgKPiR3GUYtIyY5r4YJwfgzY7VrGsoCeqFLcTVA5pFsfdP6UR uaizoqsIKxIx8XM7ISaJt1d8rNkCiDfVoietmml1gioQtY10X7 nIUfMrFTPSk

aha2940
03-02-2014, 03:07 PM
Hi

Anybody here has a DB-15 connector for sale to replace the one on my NeoGeo stick? it's a bean stick, which has the connector filled with hotglue and it has one of the cables broken inside, so I have to replace the connector.

Thanks!

Dark Sakul
04-13-2014, 09:26 PM
Hi

Anybody here has a DB-15 connector for sale to replace the one on my NeoGeo stick? it's a bean stick, which has the connector filled with hotglue and it has one of the cables broken inside, so I have to replace the connector.

Thanks!

DB 15 connector - http://ca.mouser.com/ProductDetail/FCI/DA15S065TLF/?qs=sGAEpiMZZMuKcrGJUvEKSSyd2iPZ2LAv2EKgkqAq6hg%3d

DB Back shell - http://ca.mouser.com/ProductDetail/FCI/86303638BLF/?qs=sGAEpiMZZMu5A18b%252bIx2GmrEeGB24PRSRu7bctwloe o%3d

distropia
05-07-2014, 07:15 PM
Hi

I'm trying to build a NeoGeo Memory Card with read led (as schematics are freely available here: https://wiki.neogeodev.org/index.php?title=Open_hardware_memory_card).

The main problem is, after long journeys trying to find the pc-card 68pin connector, I am unable to find it. I've found many but none with rails to help the insertion. I really like the one NTM uses on his neosavemasta.

Well, I'm lying, found one with rails ( HERE (http://www2.mouser.com/ProductDetail/FCI/10014744-002SLF/?qs=%2fha2pyFaduj%2fg4FDgP2nagH3JfdXDxY%252bWJVOQx plVBBjtaJHqmc8OZCMYqx8ty6w) ) but SMD and not straight pins to solder to each side of my PCB. SMD gives less strenght to the insertion and removal.

Can someone enlighten me where to find exact connector?

shadows
05-07-2014, 07:29 PM
Heres one http://www.digikey.es/product-detail/en/IC1FA-68PD-1.27DS%2872%29/HR1195-ND/1025098

distropia
05-07-2014, 08:22 PM
Heres one http://www.digikey.es/product-detail/en/IC1FA-68PD-1.27DS%2872%29/HR1195-ND/1025098

That's for the memcard reader. I mean the connector for the card itself (female)

aha2940
05-08-2014, 08:38 AM
Maybe you could ask NeoTrufMasta if he can sell you one or where does he get them? he's a nice guy, I'm pretty sure he'll help you.

Regards.

goombakid
07-02-2014, 12:34 AM
Anyone got a good source for female SCART connectors in the US?

Xian Xi
07-02-2014, 02:03 AM
Anyone got a good source for female SCART connectors in the US?

I got some. How many you need?

goombakid
07-07-2014, 11:07 PM
Ok, now I'm looking for the male 8 pin DIN connectors for Genesis/SMS. I know they're specific size and differ from the Neo Geo A/V and TG16 controller DIN connectors, which I can source locally. What's the specific size/class/whatever for those?

Yodd
07-07-2014, 11:24 PM
Ok, now I'm looking for the male 8 pin DIN connectors for Genesis/SMS. I know they're specific size and differ from the Neo Geo A/V and TG16 controller DIN connectors, which I can source locally. What's the specific size/class/whatever for those?

They are 262 degree 8 pin din. U shaped pin layout.

http://www.showmecables.com/product/8-Pin-DIN-Male-Solder-Connector-262-Degree-Style.aspx

And that's a damn good price for them.

goombakid
07-08-2014, 12:16 AM
They are 262 degree 8 pin din. U shaped pin layout.

http://www.showmecables.com/product/8-Pin-DIN-Male-Solder-Connector-262-Degree-Style.aspx

And that's a damn good price for them.

Thanks, Yodd...and Sifu for earlier.