can someone get me started on this wiring project?

Just got this blast city cabinet. It's in pretty rough shape and had bass fishing in it. I want to either wire it up for jamma or naomi stuff.most likely jamma....since I have a box full of wiring for a full jamma cab. I would like to take out as little as possible though

anyways...I was wondering if someone could tell me where I can find the pinout for this and what it's supposed to plug into...

I don't know if I have this right....but one looks like it hits a jvs naomi I/O and the other look like they go to some connector that goes to a naomi system...not sure if that's right.....but I sure am kicking myself for selling that Blast city to jamma harness I bought

I believe the Black side goes into a Naomi I/O, 12/15 pin connectors would go to controls (buttons, joysticks, etc.) I would guess the 15 pin with all the grey wires (based on a color chart) is carry several analog axises for the fishing controller and digital switches were on the other connector. The small one, I have no idea...could easily be one of the single-row headers on a Naomi board...

You probably wouldn't retain this if you were moving to JAMMA, but it may be handy if you were going JVS.

-Dan

danox574 said:

I believe the Black side goes into a Naomi I/O, 12/15 pin connectors would go to controls (buttons, joysticks, etc.) I would guess the 15 pin with all the grey wires (based on a color chart) is carry several analog axises for the fishing controller and digital switches were on the other connector. The small one, I have no idea...could easily be one of the single-row headers on a Naomi board...

You probably wouldn't retain this if you were moving to JAMMA, but it may be handy if you were going JVS.

-Dan

Click to expand...

andy said they go to some board for the fishing game, lol....looks like I am goingt o have to pull the box off the psu and see wha I have in there.