I have a slew of Naomi parts here that need homes...
Want to package up for you a Naomi 1 MB (left), Tri-Voltage power supply (12V, 5V, 3.3V) (top center), 17VDC transformer for powering audio amplifier (bottom center), SEGA JAMMA I/O unit (upper right), and Audio Amplifier including crossover for subwoofer (lower right).
Basically, with the addition of a pair of RCA cables, a USB cable, and a little power wiring you'd have to devise for yourself, this is a JAMMA ready configuration. I can include a schematic printout showing the interconnections. I have enough parts to probably make 2 or possible three of these sets, and willing to let them go very inexpensively, around $100 + shipping should do it (weight is an issue, depending on your distance from Detroit). Components are untested by me but tested by a trusted person I bought the lot from, so they are assumed to be working by me and if you find otherwise, I will make it right.
There is a dipswitch on the MB for high res (31K) or low res (15.75K), so you can consolize this pretty easily by leaving out the audio amplifier and audio transformer and running the line-level right off the motherboard, putting a video converter off the VGA output running at 15.75KHz. A supergun-ready configuration could also be arranged.
If you need any single parts, I have all of the above, as well as 3 Non-JAMMA Sega I/o boards (like for a Uni cab or other JVS Sega cab) as well. Let me know what you need and your ZIP and I'll give you a quote for the parts.
-Dan
Want to package up for you a Naomi 1 MB (left), Tri-Voltage power supply (12V, 5V, 3.3V) (top center), 17VDC transformer for powering audio amplifier (bottom center), SEGA JAMMA I/O unit (upper right), and Audio Amplifier including crossover for subwoofer (lower right).
Basically, with the addition of a pair of RCA cables, a USB cable, and a little power wiring you'd have to devise for yourself, this is a JAMMA ready configuration. I can include a schematic printout showing the interconnections. I have enough parts to probably make 2 or possible three of these sets, and willing to let them go very inexpensively, around $100 + shipping should do it (weight is an issue, depending on your distance from Detroit). Components are untested by me but tested by a trusted person I bought the lot from, so they are assumed to be working by me and if you find otherwise, I will make it right.
There is a dipswitch on the MB for high res (31K) or low res (15.75K), so you can consolize this pretty easily by leaving out the audio amplifier and audio transformer and running the line-level right off the motherboard, putting a video converter off the VGA output running at 15.75KHz. A supergun-ready configuration could also be arranged.
If you need any single parts, I have all of the above, as well as 3 Non-JAMMA Sega I/o boards (like for a Uni cab or other JVS Sega cab) as well. Let me know what you need and your ZIP and I'll give you a quote for the parts.
-Dan
