WTB: "Special" modding services!

Hello guys! Well, lets get to what I need done...

I'm looking for someone that can fix my 1P and 2P harness so I can use these on my cab. The only problem is that the harnesses that I have doesn't have that special 5-pin harness connector. I think you all see where I'm going with this. I'm looking for someone who is able to connect a 5-pin harness onto the 1P and 2P harness. I will provide everything except for the open-barrel crimp tool (which is obviously needed!) and pay for shipping both ways. I don't have all the parts but I might well ask now so I can immediately send as soon as I receive them. Remember, even though this seems like an easy job for anyone to do, I'm looking for someone who does a quality job, and pays close attention to details. I'm anal like that.


Name your price, if you're interested, we can iron out the details.

Here is an image of my control panel.

you want to use your 5 pins connector on your joystick ?
i think you just have to take a ground from your separate control(up,down,etc)and your four directions cut the connectors and buy 5 pins connectors may be you can check on jammaboards for 5 pins 0.254 it could fit your joystick
after check what pins on your joystick connector match what direction and ground.Just crimp your 5 wires(ground,up,down,left,right) to the appropriate pins of your 0.254 connector
i think it should be ok
If someone can confirm that ^^

Orochi P-E said:

you want to use your 5 pins connector on your joystick ?
i think you just have to take a ground from your separate control(up,down,etc)and your four directions cut the connectors and buy 5 pins connectors may be you can check on jammaboards for 5 pins 0.254 it could fit your joystick
after check what pins on your joystick connector match what direction and ground.Just crimp your 5 wires(ground,up,down,left,right) to the appropriate pins of your 0.254 connector
i think it should be ok
If someone can confirm that ^^

Click to expand...

Well, uh, something like that, yes.


I have an idea of what to do, but I would rather have someone else do it for me.

haha man do it yourself it's the best way to learn

maybe i'm missing something, but what's wrong w/ regular LS32's?

to have to go through so much trouble just seems a bit redundant.

califoreigner said:

maybe i'm missing something, but what's wrong w/ regular LS32's?

to have to go through so much trouble just seems a bit redundant.

Click to expand...

Well, a long time ago I bought these two LS-32-01 joysticks. I want to use them so I'm asking if anyone is willing to fix my 1P/2P harness for me.

Orochi P-E said:

haha man do it yourself it's the best way to learn

Click to expand...

I would try it, but I'll need an open-barrel crimp tool. I'm still open to anyone who is willing to do this for me.