Iritating Maze Help!!

N80G80

N80G80

Igniz's Servent
Joined
Jun 27, 2006
Posts
1,072
So I got an IR Maze cart/Mobo and Interface board as well as the trackball. Only problem is I dont know how the trackball gets wired to the interface board. As well as any additional wiring I may be missing. Can anybody help me out??

A scan of the manual would be great if anybody has one or can point me to one.



Thanks!!!
 
Xian Xi

Xian Xi

JammaNationX,
15 Year Member
Joined
Dec 1, 2005
Posts
27,750
If I remember correctly the pins on the right side of the interface go to the 1b and pins on the left go to the trackball but it requires a 5v line to the trackball which you have to kinda rig yourself if I remember.

Can anyone confirm that?
 
N80G80

N80G80

Igniz's Servent
Joined
Jun 27, 2006
Posts
1,072
I got the wire on the right that runs to the 1b, its the middle connector on the left I think that goes to the trackball, I just need a pinout.
 
Xian Xi

Xian Xi

JammaNationX,
15 Year Member
Joined
Dec 1, 2005
Posts
27,750
N80G80 said:
I got the wire on the right that runs to the 1b, its the middle connector on the left I think that goes to the trackball, I just need a pinout.
Click to expand...

I dont think the 5v line is part of the middle connector, should be a seprate line.
 
MKL

MKL

Basara's Blade Keeper
20 Year Member
Joined
Mar 8, 2002
Posts
3,686
The trackball connects to the jamma edge of the interface, pins 18-21.
 
N80G80

N80G80

Igniz's Servent
Joined
Jun 27, 2006
Posts
1,072
MKL said:
The trackball connects to the jamma edge of the interface, pins 18-21.
Click to expand...


How? when the trackball has got two 4 pin connectors on it?
 
N80G80

N80G80

Igniz's Servent
Joined
Jun 27, 2006
Posts
1,072
First off thanks MKL, so I dont need to wire anything to con2, 3, or con 4 on the interface board then?

If that right just let me know. Also you got a manual, I'd pay you for some scans
 
MKL

MKL

Basara's Blade Keeper
20 Year Member
Joined
Mar 8, 2002
Posts
3,686
That pinout is all you really need. The other connectors on the interface are for additional hardware of the dedicated cab (timer lamps, air compressor).
 
N80G80

N80G80

Igniz's Servent
Joined
Jun 27, 2006
Posts
1,072
Thanks Again MKL, finally I get to play it the way it was meant to be played with a Trackball!!!!
 
You must log in or register to reply here.
Top